User manual - IEC Telecom

Starting up the terminal
SIM card
Chapter 2: Getting started
2222
Note that the SAILOR FleetBroadband terminal requires a SIM card dedicated
to FleetBroadband. The terminal can only access the BGAN network when the
right type of SIM card is installed. For information on how to insert the SIM
card, refer to the installation manual.
Switching on the terminal
Getting started
Using the Power switch
Note
If you have the 19” Rack variant of the SAILOR FleetBroadband
terminal, you can use the on/off switch in the front panel. See the
next section 19” Rack terminal: Using the front power switch.
To switch on the terminal, use the On/Off switch in the connector panel. It
normally takes one or two seconds for the terminal to switch on.
Starting up the terminal 21