Cessnock Local Environmental Plan 2011

2011 No 702
Cessnock Local Environmental Plan 2011
Schedule 2
Exempt development
(2) Maximum width—900mm.
(3) 1 double sided sign per premises or 1 per business, whichever is greater.
(4) Must be removed outside business trading hours.
(5) If on land in Zone RU4 Primary Production Small Lots—must not be
visible from a public road, public place or adjoining property.
(6) Must not be illuminated.
(7) Must be non-flashing.
Signage—business identification signs for businesses in business zones
(1) Must meet the general requirements for signage.
(2) Maximum area—8m 2 (except where otherwise prescribed).
(3) Maximum height—8m (except where otherwise prescribed).
(4) Fascia signs
Sign attached to the fascia or return of the awning:
(a) 1 sign per premises, and
(b) must not project above or below, or more than 300mm from the
fascia or return end of the awning to which it is attached, and
(c) must be non-flashing.
(5) Flush wall signs
Sign attached to the wall of a building (other than the transom of a
doorway or display window) and not projecting more than 300mm:
(a) maximum area—20% of the wall area, and
(b) must be non-flashing.
(6) Projecting wall signs (excluding underawning signs)
Sign attached to the wall of a building (other than the transom of a
doorway or display window) and projecting more than 300mm:
(a) 1 sign per premises or 1 per street frontage, whichever is greater,
and
(b) maximum projection—1.5m, and
(c) maximum area—1.5m 2 , and
(d) must be non-flashing.
Page 68