15-B Operation (Mach Ctr), GFZ-62564E-1/02

1. INTRODUCTION
B–62564E–1/02
5) Part program editing (See Section 9)
After a created program is once registered in memory, it can be corrected or modified from the CRT/MDI
panel.
This operation can be executed using the part program storage/edit function.
Fig. 1 (m)
Part Program Editing
6) Data display/setting (See Section 10.10 and 10.2)
Data stored in NC memory can be displayed and corrected via the CRT/MDI screen.
Fig. 1 (n)
Data Display/Setting
– 10 –