15-B Operation (Mach Ctr), GFZ-62564E-1/02

1. INTRODUCTION
B–62564E–1/02
(iv) Displaying operator messages (See Section 11.4).
When the system must notify the operator of necessary information during machining, the system displays
the message preset in memory.
(v) Displaying alarms (See Section 11.5).
⋅
⋅
⋅
⋅
⋅
⋅⋅⋅⋅
⋅⋅⋅
⋅⋅⋅
⋅
⋅
⋅
⋅
•
•
•
•
•
•
If a failure occurs while the machine is operating, the system displays the corresponding error code
and alarm message on the CRT screen.
For details of the error codes, see Appendix G in the Operator’s Manual (Programming).
– 16 –