Katsele - IKH Service

18、Pre-operation check
Be sure to check the generator on a level surface with the engine doesn’t work.
1 Check the engine oil level.
1. Loosen the 2-maintenance cover screw (3) and remove the front side
maintenance cover. (Fig.A)
A B C
2. Remove the oil filler cap by rotating the cap anti-clockwise and inspect to see the oil level (Fig.B).
3. If the oil level is below the top of the oil tank housing neck refill with either SAE30 (single viscosity)4stroke all the way to
the top of the oil tank neck (refer to the “Engine oil filling/replacement” section of this instruction manual)(Fig.C).
NOTE. Completely remove the oil filler cap when checking oil level. The oil cap is not required for checking oil level.
4. If the oil is contaminated or has discolored, ensure you change the oil. Refer to the ‘Engine oil replacement’ section for
instructions.
18