PYRAMIDS in Russia_ Construction Stages

PYRAMID
CONSTRUCTION STAGES

Valery Uvarov
- Member of Russian Geographic
society.
- Head of the UFO association of
the Unity of Supreme Officers of
Russia.
- Head of the Department of Paleo
Sciences & Paleo Technologies of
the National Security Academy
Of Russia
Author of numerous publications on
UFOlogy, Egyptology and Esoterica
in the Russian and foreign press.
Initiator and participant of a
number of expeditions to India,
Egypt, Mexico, Cambodia,
Indonesia, China and other
countries in search of material
evidence of ancient knowledge.
Regular participant of international
conferences, lectures and seminars
in America, Britain, Germany,
Finland, Australia, Holland,
Sweden, Bosnia , Brazil and Japan.
Contact : valdino@gmail.com

Pyramid Construction
After millennia has passed, in the autumn of 2006 we began the
construction of large diameter pilot pyramid structure in Russia. Our
proven capabilities define the beginning of a new era in the
construction of the Pyramids on Earth.
Long-term studies of the pyramids of Egyptian, Mayan, Chinese, and
Sumerian origins through ancient texts, and scientific experiments to
study the impact of the pyramid field has on objects animate and
inanimate in nature, as reflected in the book by Valery Uvarov
"Pyramid" (published in 2013 ), formed the basis for the construction of
the pyramid that has been built at Tomsk near St. Petersburgh. In
contrast to the ancient pyramids and modern structures built by
Alexander Golod, our experimental pyramid is monolithic, made ​of
concrete containing white quartz sand . Embodying not only basic but
also lesser-known features of construction of the pyramids of ancient
civilizations, as well as the basic principles of cosmoplanet cyclicality,
the new pyramid is:
‣ A four-camera system resonators not previously encountered
‣ A three-tier system of water tanks
‣ Extending downward along the central axis of the pyramid tapered
channel to concentrate flows of energy (space-time).
‣ Power plant.
At the top of the pyramid is set a quartz pyramidion under which is
located on the axis of the pyramid complex special energy sources.

PHASE 1

Site preparation for the construction of the pyramid began with the
search georazloma (cracks in the earth crust) with non-pulsed (DC)
power flow of the Earth. In the process of searching in the area
of ​construction of the pyramid was discovered ancient "temple",
which is not less than 700 years. Center "temples" in ancient times
were marked by a stone circle with radiating "arrows" of stacked
rows of stones on the ground, resembling the spokes of a wheel.
After determining the three areas with the strongest flow, the
location for the first pyramid was chosen and work began on leveling
the site for the construction of the foundation of the pyramid. The
dotted arrow shows the direction georazloma. The photograph shows
that the georazlom timed to the batter out of the ground the key (it's
not a big pond in the foreground of the photo). On the other side of
the track is traced georazlom with birches growing along it.

Laying gravel and drainage pipes to drain out of the pyramid
of water after precipitation events.
Alignment of the site, strewn with gravel.

After topping the gravel layer with white quartz sand, we began
preparation of formwork for concreting of the foundation of the
pyramid.

After readiness formwork began soundings platform for formwork
and Orientation.

Next test was conducted and the horizon of the future levels of
the foundation
After installation of formwork was placed fittings, then
proceeded to pour the concrete mix with white quartz sand.

Pouring concrete mix with white quartz sand.

A few days after completion of the work and preparation of
materials for the next phase of construction, the first snow
fell. Now the foundation should stay a few months.
In late May 2007, the next phase - the construction of the
pyramids.

PHASE 2

It all started with a check on the strength of the foundation. The load
testing was done with a multi-ton machine, and then the pyramid base
filled on all sides by gravel to allow construction access.

Timber planks and plywood for the formwork for the fabrication
of frameworks and building the first level of the pyramid.
Setting the determinant column height of the pyramid.

Installing skeleton formwork for the pyramidal cells of the
resonators on the first level of the pyramid.

The next stage was the sheeting of the plywood frames, cameras
resonators and corridors between them.
In parallel, work was carried out to strengthen the frameworks
cameras resonators to ensure the mass poured concrete would
not deform (sag).

Entrance to the pyramid is on the north side.

The veneered frames of the pyramidal cell resonators looked so
impressive. Immediately after the completion of their skin, all the
workers noticed a sharp increase in tactile sensations: vibrations in
the hands, the body and the spine, back stopped hurting. There
have been other positive changes. At night energy facilities
appeared over the pyramid. The pictures shows villagers living
neard the construction site.

We then applied a layer of diesel on top of the pyramids shells to
stop atmospheric moisture affecting the quality of the surface and,
subsequently to make the cured concrete mix separate more easily
from the formwork.

Then began the construction of the inner frame (central)
chamber of the pyramid.

PHASE 3

After finishing the forms and their reinforcement by inner blocks,
we started the work of laying the steel reinforcement.

First, the reinforcement for the strengthening of the walls of the
inner pyramid resonator chambers is put in place.

Next the steel reinforcement was placed before the erection of the
external forms to the mark of 2.5 meters.

The external and internal forms will be connected to each other
with long bolts. This will allow the forms to hold large masses of
wet concrete

The strengthening with the reinforcement of the walls of the
corridors connecting the resonator chambers.

Here we see the erection of the external forms. At this stage there
will be a first stage pour to the 2.5 meter mark. This is the most
important phase because at this stage the cement will form almost
half of the pyramid’s mass.

On 23rd July 2007 the external forms were erected to the 2.5
meter mark.

PHASE 4

On 24 th July 2007 we poured 100 cubic meters of concrete into the
body of the pyramid onto the base of white sandy quartz.

On July 28, we started to erect the external forms to the height of 4
meters.

Between the internal pyramid resonator chambers and the central chamber there will be
reservoirs which will hold water. According to our research, the water having been exposed to
the energy in the internal reservoirs will then be drained into pools for soaking. We plan two
pools. In one, the water from the reservoir in the lower third of the pyramid will be stored, in
the other, water from the focal zone. In the historical memory the characteristic of the water
having had the exposition in the lower or focal zones of the pyramid is preserved as “alive”
one (lower third) and “dead” one (focal zone). In fact the water acquires the feature of flow
harmonization of two opposite currents (Yin-Yan, BA-KA) of inner biological time. In the
process of the research of the properties of the water put into the focal zone, it was found
that it does not perish for years. The field of the zone suppresses the vital activity of the
pathogenic bacteria! This effect is connected with the acidity increase of the water which is in
the zone (pH index decrease), which is an indirect sign of the speed decrease of the time
current in the zone. The most important characteristic of the “dead water” in the fact that it is
able to redistribute energy and to divert its excesses in the case of energetic redundancy,
connected, for example, with inflammatory processes. Such water has a favourable influence
in the case of hypoacidity and many other problems of the gastrointestinal tract. The field of
the zone in a certain manner influences the energetic rhythms of the water molecules. Such
water will promote the removal of skin inflammations, suppressing the activity of the harmful
bacteria. The lower energetic pyramid level has the structure forming field, having positive
stimulating influence on the wildlife. The field of the zone influencing the water molecular
structure and energetic rhythms endows it with different properties. It becomes alkaline one
(pH index increases), its electrical conduction increases. This is the water which the folk
tradition calls the “alive’ one. Such water will stimulate small wound healing, activating the
cell regeneration processes of the cutaneous covering tissues, having a positive influence on
the superficial veins and many other things. Bathing in both pools will have deep healthimproving
influence on a person and his/her immune system. Such a procedure, for example,
having evident antineoplastic and antiviral action, will stimulate and increase the activity of
nervous, endocrine and immune systems. Here is the key to the achievement of the amazing
results, about which the humankind doesn’t even suspect is possible. One can read in detail
about the properties of the pyramids built in getting a glance into ancient knowledge and on
the basis of exact sciences in the book “The Pyramids”, published in 2007.

The second stage of the formwork erection is now complete. On 10 th July
2007, we poured concrete into the pyramid body to the 4 meter mark.

On July 10, we planned to pour 140 cubic meters of concrete. The
concrete trucks began arriving early in the morning.
In order to pour the concrete higher than 4 meters, we had to use a
concrete pump boom rig.

Here the concrete is being poured that will form the ceiling of the
central chamber, and we are standing on the second story floor where
the resonator chambers will be located.

Pouring the concrete around the water reservoir chambers
forms.

Here we see the forms for the water reservoirs which will be
exposed to the pyramids energy flow.

Once the first level was poured, we began the erection of the
second story forms. We are able to remove them from the ground
level and reuse them in the upper stages of construction.
The opening you see here will allow the energetic flow to go
from the upper pyramidion all the way down the core of both
zones.

The middle section of the pyramid has steel reinforcement added.

On 20 th August 2007, we pored 94 cubic meters of concrete into the
pyramid body. This will begin the phase of construction that forms of
the resonator chambers of the middle third of the pyramid.
The entrance into the cave of the water reservoir.

The internal chamber – the second floor.

At this stage the finished concrete forms the floor of the second story. In
the center of the floor there is an opening for the free flowing energetic
current (Ra-Nefer) of the pyramid.
Early in the morning, on the following day, near the building area, we
noticed an extraterrestrial of strange appearance! In his eyes there was
amazement and admiration with the pyramid he saw being built.

On August 23, we started to remove the forms from the lower part of
the pyramid. They will be reused as forms in the next stage of the
building.
Gradually from under the forms, the pyramid body appears. Already
now one can imagine how it will look like at the end of construction.

The forms have been removed from walls of the pyramid
resonator chambers.

PHASE 5

This is after the forms from the first lower third has been completed.
The forms from the lower portion will be moved up for the next higher
section known as the resonator chambers.

On the second level of the pyramid body, are the 8 resonator chambers.
The chambers are connected to the inner corridors, which form the
system, and consolidate the energetic current inside the pyramid.

Reinforcement was installed and we began to erect the external forms.

At this stage of the work the forms are erected to the top of the second
level. This allows us to pour the concrete a bit higher than the top of the
resonator chambers, and only then after surveying geometric placements
will the concrete pour be made to the level of the floor.

Here we will erect the forms of the resonator chambers of the next floor.

The form walls of the internal chamber was also reinforced by
special blocks.

In the middle level (the area called the "focal zone") will be reservoirs for water.
This is the zone of water acidation (Ph decrease). The water having had the
treatment in the zone which was traditionally called the “dead” one. In fact it is in
the zone that the energetic field slows down the time current that is why during
the experiments with bifidus bacteria there was an indication that the activity of
the bifidus bacteria in the zone was suppressed. Such indications appear for the
same reasons seen when watching old films. The objects on the screen are moving
faster. Such effect appears for the speed increase of the tape feed, what leads to
the situation that everything on the screen accelerates its movement. Obviously,
everything depends on the speed with which one is going to feed the tape.

The forms from the central section will be reused for the rest of
the construction.
On the 5 th October 2007, we poured 76 cubic meters of concrete.

Now it is time for the following level. This stage started with making the
forms for the central chamber vault.

The conical channel moving from the floor of the upper resonator
chamber to the upper central part of the vault are seen here. Opposite
energy currents of time travel down and back through the body of the
pyramid, concentrating in these definite zones. It is in these zones that
special energetic sources will be installed.

When the central chamber vault forms were made, the steel
reinforcement was laid above the vault and the reinforcement of the
pyramid side faces were added on.

The surface is washed out in preparation for the following concrete pour. At
this stage the concrete will be poured to the level of the pyramid upper third
floor surface. When we are done with this stage, we will begin to make the
forms for the 8 resonator chambers, intensifying the field of the pyramid upper
third (the upper focal zone). While there is prep work being done upstairs, we
will go downstairs and look inside the pyramid. The forms have been removed
from the walls of the resonator chambers and the central chamber.
.
The last resonator
chamber will have only
one entrance – this is the
chamber where we find
the most consolidated
energy field
Now we are at the second story of the
pyramid. This is the central chamber.
There are still many forms about, which
were holding the chamber side walls.
The concrete has solidified, but the
forms haven’t been removed yet. They
will be removed the next day, and now
you have an opportunity to see, how
properly the builders had reinforced
the forms, which had to withstand a
huge load during the concrete pouring.

This is the entrance to the resonator chamber at the second level of
the pyramid.
At this level the resonator chambers also have a pyramid form. In
the picture you see the internal part of the chamber. The walls are
still covered with the forms plywood.

To the right there is the entrance into the adjacent resonator chamber.
This entrance (in the floor of the passage) into the reservoir for the
water exposure area in the lower focal zone. This is the zone of the
“alive water” (the zone of the alkalization, pH increase).

The entrance into the resonator chamber at the opposite side.
Above the preparatory works are continuing.

By October 20 the external forms were erected up on the next level.
Between the external forms and the vault of the central chamber,
work is being done on the reinforcement laying and the installation of
the reservoirs for the water exposure.

On October 23 we planned to pour about 60 cubic meters
of concrete.

PHASE 6

We postponed pouring concrete by one day because the pump truck
was out of order. On October 25th, we poured cubic 64 meters of
concrete forming the body of the pyramid.

The pyramid continues to grow taller and taller. The forms along
the walls are used by the workers to move along the pyramid
face.

On October 27, we started to add the reinforcement steel. The upper
area is leveled prior to beginning the 8 resonator chambers on the third
floor. Their height will be 1.5 meters.
On this third level, along with the central core of the pyramid, there
are two areas to the water reservoirs where the water is exposed to
the pyramid's energy.

Due to space restrictions, we erected the forms for the resonator
chambers on the ground. The area had to be cleared before that
work could occur.

The next day it snowed for the first time in 2007/2008 winter.
The weather made it much more difficult to work. It was sometimes
10 degrees below zero. Tirelessly, the work continued on to
complete the forms for the resonator chambers and the passages
between them.

The resonator chambers of the upper level will be used to expose
objects in scientific research to the pyramid's energy. There will be
sources of energy within the passages of the upper level.
After the forms for the resonator chambers were finished, the
reinforcement steel was added on.

Here the internal chamber on the second story of the pyramid is seen
after removal of the forms
The second story of the pyramid has the entrances to the resonator
chambers on it. Once the forms were removed, the field inside the
pyramid became more distinct. The internal chamber and the passages
to the side chambers, even outwardly, have become more associated
with the chambers inside the Egyptian pyramids.

In the upper part of the vault of the central chamber there will be a
cone-shaped pipe (well), leading to the upper resonator chamber
and four resonator chambers of the third level.

The cone shaped resonator forms the well and enters into the
four side chambers of the resonator level.

The cone shaped forms for the well were covered with reinforced
iron plates.
Before the external wall forms could be completed, the
reinforcements were welded together

The weather began to cooperate during the erection of the
external forms. It got warmer and began to rain.
The assembly of the external forms began with the assembly of the
corner pieces.

We planned the last phase of concrete pouring for December 15-16,
2007. Sadly, the lack of a steady supply of concrete still plagues us.
We hope that by Saturday, December 15th, the concrete trucks will
start to come to the pyramid.
The weather is still favorable. During the daytime it is 1 degree
above zero. The climate changes began more than 1.5 years ago.
Perhaps it will bring us luck, because this year we will finish building
the pyramid body under favorable weather conditions.

Despite the unpredictable weather, the concrete was poured into the
body of the pyramid. By the end of December, the third level had
been finished
The concrete work was
finished that made the
floor of the upper
chamber where white
quartz will complete the
topmost chamber. This
upper chamber will fulfill
a special function.

In the center, there is a square entrance by which a person can enter
into the chamber in which a special energetic source will be installed
The entrance into the upper chamber will be covered with a grate
with holes for ventilation.
At this stage of
the work, there
is little room at
the top for
more than one
person

PHASE 7

The cage for the upper chamber was made on the ground, and then it
was put up, after that the steel reinforcement.
Slow and sure the works on the reinforcement laying are
nearing their end. Then we will again pour the concrete, which
at this stage will be prepared near the pyramid.

At last, the concrete pouring works for the body of the pyramid were
finished. After the works completion and aligning of the pyramid edges
the pyramidion will be erected to complete the pyramid form.
Once all the forms from the internal chambers were removed, all the
construction waste was scavenged for obvious reasons.

The entrance opening was also prepared for the door fixing. Once the
entrance was completed we brought in thermal heating equipment to
dry the internal pyramid chambers.
In the previously prepared opening in the floor of the first resonator
chamber the well was dug, from which afterwards into the internal
reservoirs of the pyramid (to all three levels) water will be given for the
exposition and its subsequent usage in the special pools.

Despite the fact that we came across a huge boulder, which we had to
broken up and removed, the place for the well was chosen correctly.
Soon the water appeared in the well, after that we installed the concrete
rings. Above the we will install a special energetic source.
Along with the well works we started the works on aligning and
levelling the walls of the resonator chambers and the central room.

Now we will go up the ladder to the second store of the pyramid. The
forms have already been completely removed there and one can see
how everything looks.
These are the entrances to the resonator chambers at the
second store (the second energetic level).

Straight behind the entrance there is the well, leading to the reservoir for
the water exposition. Through it one will be able to get access for the
reservoir cleaning. Later on it will also be closed with a cap and one will
install an energetic source for the water energies to increase.
The wall surface at this chamber is smooth enough. It seems
here there will be not so much work on the surface aligning.

Still up the stairs we go to the following level..
Before us there is the entrance to the central cone-shaped well, in
the lower part of which there are entrances to 4 upper chambers,
fulfilling the role of resonators.

The entrance into one of the chambers (resonator) of the third energetic
level. There are 8 such chambers – their height is about 1.5 meters.
We are climbing higher.
This is the entrance to the
upper chamber.
We are
climbing
even
higher...

Here it is. This is a special room, with particular parameters, in the
center of which there will be the main energetic source (as in the
Great Pyramid). Its walls haven’t been aligned and polished yet. There
is the exit above it, which will later be covered with the pyramidion,
through which one will see the sky. The pyramidion lens will be
focused at the definite stars. But we will speak about it later.

And now we will return downstairs, where one will lay the following
ring into the well bore. Then one will continue the works on the
chamber walls surface aligning. After aligning they will be covered
with a special mix and polished like glass.

PHASE 8

While the expedition participants were gathering by grains the
splinters of knowledge in the temples of Cambodia and Egypt, the
pyramid builders in Russia have considerably advanced in the work on
preparing the resonator chamber walls. In the places, where the
forms did not withstand the pressure of the concrete and deflected
there appeared barely visible prominences. All these prominences
were sheared, and the wall surfaces were levelled using a special mix,
containing silicon.
Despite the fact that the forms mainly withstood the pressure of the
concrete the prominences were in all the chambers, that is why the
work on prominence shearing took up a lot of time.

As a result of the work with the wall surface one will get a high-quality acoustic effect with
the possibility of transformation of the pyramid energy current into the range of the
vibrations perceived by the human organism and energetic system. At the first stage from the
central openings in the pyramid chambers one pulled out gravel stones and sand. All 9
openings will thoroughly be cleaned and aligned, and then in each opening they will install
an energy source. In the energetic mechanism of the pyramid these “energy sources” will
play a special, key role. The prototype of such a device is in the Great Pyramid. It was
inherited by the ancient Egyptians from the Atlantians, who came to the north of Africa long
before the flourishing of the Egyptian civilization. This “source” is a device in the base of
which there is a special crystal, whose parameters of the crystal lattice are close to those of
the quartz. Almost all the most wonderful phenomena in the Great Pyramid and around it
are connected with the presence of the device. The sense of the usage of the “energy source”
is in its ability to have energetic influence on the spatio-temporal structure of the region of
the pyramid location. The “energetic source” itself is designed in such a way, that its function
is connected with the energy shedding pulsing core of our planet. In the definite periods of
the year the processes happening in the Cosmos arouse the excitation of the core of our
planet, which starts to shed the energy stimulating the evolution of all living things on the
Earth. Intensifying the current of this energy (vibrations of the definite frequency), the
pyramid focuses it on a person, who is in the definite chamber of the pyramid. But if only
one “source” was installed into the Great Pyramid, in our pyramid there will be installed 9
complexes of the energetic devices. To restore and to reproduce the construction of such a
device became possible in the process of the analysis a row of ancient monuments, due to
this there appeared an opportunity to intensify the pyramid influence having placed in the
pyramid several “sources of energy”. Already at the stage of bench tests these energy devices
gave the result which surpassed expectation!.

After finishing the works on aligning the walls, the quality and geometry
of the surfaces will be checked by means of the special laser device.
One of the cavities into which there will be installed one of 9
complexes of the “energy sources”.

Only by the beginning of June 2008, one had finished works on the
preparing the wall surfaces and then started the works on their
aligning. After the surfaces were properly aligned and prepared we
started to spread a special mix, containing white cement, silicon,
ground quartz and liquid glass in the golden section ratio..
The stages of plastering the walls of one of the internal
resonator chambers.

Layer-by-layer dabbing with the special mix of the walls of the chamber,
into which the entrance from the northern side leads.

The wall aligning of the central chamber in which there will be the
main multi level “energy source”. .
The generating unit, which is planned for the installation in this
chamber, will in principle consist of the complex of the devices,
forming 14-level system (7 KA – 7 BA), focusing the energy flow in the
curtain focal zones.

The main idea of the system is for a person who is inside to be able to
become the center of the universe energy current in one variant of the
unit element orientation, and in the other one for a person to become a
link of the chain along which the energy current goes to the multilevel
energetic system of the universe.
The surface drying before the final aligning.

At the same time there were framing scaffolds erected at the
eastern side of the pyramid and one started the works on its
aligning and preparing for the covering with a special mix.

Already at this stage about the side surface one installs special
beacons, by means of which later the surface geometry can be
defined by means of the special laser unit.
When the pyramid is covered by the night darkness local boys and
girls are climbing it.

They easily and quickly understand things which we adult
comprehend with difficulties and for a long time. Looking at them one
deeply understands that these are them who will cope with the
pyramids, they will change our world for best, using their energy and
properties – they are our future..

Next morning the adults climbed up the pyramid.

There have been a lot of rumors spread that the pyramid,
as the ancient texts say, grant strength and happiness..
For the external aligning works 4 to 9 people are occupied.

As the mix, with which the pyramid is being covered, is drying, the
walls gain a limy white color.
For the pyramid influence to be effective enough in future, its sides
and inner surfaces must be carefully aligned and brightly polished.

Dabbed on the walls inside the pyramid the mix is drying slowly
which makes the cover very firm.
After the walls and ceiling dry one will start to lap them, and then
they will be covered with the white envelope.

The wall aligning in the side resonator chambers..

The first day of the eastern side aligning was finished at the level
of 4 meters.
And the next day the works on the eastern side aligning were finished
after that the framing scaffolds were removed to the northern side.

By 27 th July 2008 the northern side aligning had been
successfully finished.
The north eastern edge of the pyramid has acquired clear geometry.

The next stage is the western side aligning.
The plane of the finished side is even.

The side surface has acquired an impressive shape and finish.
The additional bags of the white cement for internal finishing works.

The walls of the internal chamber have dried and are ready for the
pointed aligning after which according to the plan they will be
covered with the special mix of white color.

The vault of the second store chamber. The chamber will be used for
the water exposition and medical experiments. Straight after finishing
the works on the pyramid building it is planned to conduct a series of
scientific works on medicine, particularly on oncology, endocrinology
(in the first place, on diabetes ), the problems of the gastrointestinal
tract (GIT). Also they will cover a areas in botany, research of the water
structure changes, exposure of the medicinal substances, biologically
active supplements, creams and ointments of medical and cosmetic
prescriptions.
After the western side aligning the framing scaffolds were removed to
the south side. Such order of work was chosen not by accident and is
connected with the definite energetic cycle.

Along with it, beginning from the upper third, the sides of the
pyramid we started to cover with the special mix. This is a particular
kind of the liquid glass.
The work on the southern side started with smoothing all irregularities.

The process of shearing all the unnecessary things is very labourintensive.
The concrete with the white quartz shows very high
strengthening characteristics.

By 11 November 2008 the works on shearing all the prominences
had been finished after which we started the process of spreading
the white quartz and white cement finish coat.

PHASE 9

Winter and spring 2009 brought us a lot of new things. One should
admit that all the problems which we faced in the process of the
pyramid building opened our eyes to the difficulties, which in their
time the builders of the ancient pyramids used to face. Undoubtedly,
this a huge experience which has allowed to understand the nuances
and to analyze some technological decisions used by our predecessors.
At this time we researched the energy sources, which planned to
install in the pyramid and in the summer of 2009 we started to
implement our plans. At the first stage it was necessary to install 8
energy sources into the caves specially prepared for this in the pyramid
floor. On the first photograph made at the very beginning of the
building one can see 9 square openings in the pyramid basement.

But under the cave which is in the first chamber there is a well. The
water from the well will be given to the reservoirs, which are in the
pyramid walls. Then after long exposition it will be shot into the
special pools for water procedures.
3D Structure-Image

By the beginning of August 2009 all the elements of the energy
system for the first level of the pyramid had been prepared and
delivered to the pyramid. Special boxes had been made. Inside them
the devices will be assembled.
Inside the boxes have mirrored surfaces

After we took the boxes into the pyramid the mirrors were wiped
to remove the dust.
Then the box was put into the cave in the center of each
resonator chamber.

Further we started the installation of the elements of the energy source.
The important thing is that in its nature is something like perpetual
motion – a continuously operating machine. Despite the fact that it is
physically connected to nothing after the assembly it starts to actively and
powerfully shed energy currents. These are expressive vibrations. Amazing
states appear during the presence in the field: arms grow numb, the
whole body becomes heavy and one has a feeling of the energetic
overfilling, and then a striking vitality appears. From nowhere the strength
and the feeling of delight appear.
All the elements are installed into the system the carrier frequency of
which is adjusted strictly to the own frequency of the Earth planet in
the low-frequency range.

PHASE 10

The next stage will be the erection of the quartz pyramidion. But
before this the pyramid will be covered with the ceramic granite
which is as white as milk. It will allow to get the surface as even as
glass and to more exactly adjust the pyramid to the energy
currents of the definite frequency and wavelength.
At first one laid the ceramic granite planches around the whole
pyramid along the marks, indicating the pyramid basement width.
In a way, the ancient builders did the same thing. When marking
the pyramid basement they made the line on the basement
surface to orient on it when laying the blocks.

At this rare picture of the basement corner of the pyramid Snof-Ra
in Dashur one can see the line well.
The ceramic granite planches are laid with the minimal gap, and
then they are covered with polyethylene film to protect them
from precipitation until the glue dries completely.

The tile laying was started from the pyramid south side.
The work is in full swing – by the weekend the whole south side will
have been covered with the tiles to the basement of the pyramidion.

At the same time they started the ceramic granite tile laying on the
pyramid eastern side.
The most difficult operation is the edge joining and precise tile
cutting along the pyramid edge.

The erection of the framing scaffolds on the western and
northern pyramid sides.
On September 18
the southern
pyramid side was
completely
covered with the
ceramic granite to
the level of the
pyramidion.

On 19 September 2008 the support scaffolds were
taken down and removed to the eastern side.
The waterproof film
was taken off the
surface. On the
picture one can see
well as the pyramid
sides reflect the light
of the day end.

Along with finishing the works on the south side there are the works
being done on the ceramic granite laying on the western and northern
pyramid sides.
On September
19 according to
the plan the
scaffolds were
taken down
from the
pyramid
southern side
and removed to
the eastern side.

The tiles on the southern side have been laid to the level of the
pyramidion the erection of which will take place after finishing the
works on laying the ceramic granite on all four sides.
On the western side 7 rows of the tiles have been laid.

On the northern side almost 5 rows of the tiles have been laid.
On September 27 the eastern side was covered almost
to the pyramidion.

The northern and western sides have risen even higher – the last step is
left. By the end of the week all the pyramid sides will be covered with
the ceramic granite and we will start the pyramidion erection.
On October 5 the pyramid building will be covered with the ceramic
granite completely.

The preparations for the pyramidion erection have started. But even
now one can note the dramatically increased pyramid field. The
vibrations have become considerably stronger than even on the day
of the autumnal equinox.

The field’s power increase is the evidence that the pyramid has
been built in the right way and that it has pierced the current. Now
this effect will gradually increase, the pyramid will gain power,
joining the Earth’s energetic field.

On October 15 the
upper area for the
pyramidion was
prepared after which
the quartz pyramidion
was erected itself.
After the
pyramidion
erection the
framing scaffolds
were taken down.

The pyramid outer contour is prepared. The next stage is the works
on aligning the resonator chamber walls inside the pyramid.