You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Function</strong>s and Parameter Descriptions<br />
23<br />
TREMOLO<br />
<strong>Function</strong><br />
TREMOLO I/O<br />
TREM DPTH<br />
TREM RATE<br />
SHAPE<br />
TIME<br />
The Tremolo effect continuously varies the volume of the signal.<br />
To access this function you must first press the “EDIT” button to enter into the<br />
“EDIT MODE” and turn the FUNCTION SELECT knob to the right until<br />
***TREMOLO*** appears on the display.<br />
The PARAMETER SELECT control will allow you to access each of the following<br />
Tremolo parameters:<br />
The PARAMETER ADJUST control allows you to adjust the selected parameter:<br />
The TREMOLO I/O parameter determines whether the tremolo circuit is active or bypassed<br />
for the current preset. Select IN if you want to engage the tremolo. Select OUT if<br />
you want to bypass the Tremolo.<br />
The TREMOLO DEPTH parameter determines the amount of modulation for the Tremolo<br />
signal. Lower DEPTH settings produce more subtle tremolo effects, while higher settings<br />
will result in a more extreme tremolo effect.<br />
The TREMOLO RATE parameter determines the speed at which the tremolo signal<br />
modulates (or increases and decreases in volume).<br />
The SHAPE parameter determines the waveshape of the tremolo signal. Selecting a<br />
different waveshape produces a different tremolo effect.<br />
The TIME parameter determines the multiplier by which a new modulation rate will be<br />
selected for the RATE parameter when the Tap Delay feature of the Blue Thunder is used.<br />
(See Section 7 page 42: "Tap Delay" for more information on the Tap Delay feature.)
Change language