Function - Musician's Friend

More documents

Recommendations

Info

49 Operating the Blue Thunder Step 6 Press the STORE button on the Blue Thunder to initiate the data dump. As the Blue Thunder performs the dump, it will display "XXX DUMPED" - where "XXX" = the number of the data string currently transmitting (i.e. strings 1-254 are presets, titles, controller information and 2-tap delay information; string 255 contains program mapping information; and string 256 contains miscellaneous information. Contact Rocktron for information on how to receive a detailed MIDI spec). XXX DUMPED TRANSMITTING BLUE THUNDER Step 7 After the Blue Thunder displays "TRANS COMPLETE", stop the sequencer. The sequencer should have recorded all of the data that was dumped from the Blue Thunder. Keep this data stored on a disk in a safe place. Turn the PARAMETER SELECT control to continue. STOP
To reload user data from a sequencer Step 1 Operating the Blue Thunder Connect a standard MIDI cable from the MIDI OUT of the transmitting sequencer to the MIDI IN on the receiving Blue Thunder. IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving Blue Thunder back to the MIDI IN of the transmitting sequencer. Step 2 Step 3 Step 4 Press the EDIT button to enter the “EDIT MODE” EDIT MODE Turn the FUNCTION SELECT controls on both the receiving Blue Thunder until "MIDI DUMP/LOAD" is displayed. MIDI DUMP/LOAD RECEIVING BLUE THUNDER Turn the PARAMETER SELECT controls on the receiving Blue Thunder until "BULK DUMP/LOAD" is displayed. MIDI DUMP/LOAD RECEIVING BLUE THUNDER 50
Page 2 and 3: Your Blue Thunder has been tested
Page 4 and 5: 1. Introduction Congratulations on
Page 6 and 7: 3 2. Quick Setup SELECTING A PRESET
Page 8 and 9: 5 Front Panel Desccription 9 EQUALI
Page 10 and 11: 5. Connections 7 Using the Blue Thu
Page 12 and 13: 9 Using the Blue Thunder with a Bas
Page 14 and 15: 11 Using the Blue Thunder with a Ph
Page 16 and 17: 13 Block Diagram blue thunder block
Page 18 and 19: 15 Functions and Parameter Descript
Page 20 and 21: Functions and Parameter Description
Page 22 and 23: 19 COMPRESSOR Function COMPRESR I/O
Page 26 and 27: Functions and Parameter Description
Page 32 and 33: 29 Functions and Parameter Ranges F
Page 34 and 35: 31 7. Operating the Blue Thunder S
Page 36 and 37: 33 Operating the Blue Thunder Edit
Page 38 and 39: 35 Operating the Blue Thunder Cont
Page 40 and 41: 37 Operating the Blue Thunder Step
Page 42 and 43: Operating the Blue Thunder 39 Copy
Page 46 and 47: Operating the Blue Thunder Program
Page 48 and 49: 45 Operating the Blue Thunder MIDI
Page 56 and 57: 53 Operating the Blue Thunder !! CA
Page 60 and 61: 8. Appendix 57 Error Messages Messa
Page 62 and 63: Technical Data 59 MEASUREMENT Maxim
Page 64: www.rocktron.com Rocktron - A Divis

Function - Musician's Friend

Create successful ePaper yourself

Delete template?

Save as template?