English - EastPoint Sports

TOOLS: Required
• 1 - Phillips Head Screwdriver
(Standard Size) – Not Included
• 1 – Hex Wrench – Included
• 1 – Allen Wrench - Included
Recommended (Not Required):
• Electric Screwdriver or Power Driver
CAUTION – DO NOT OVER TIGHTEN. Over Tightening will result in
irreparable damage to the product. If using, please make sure that the
tool is set to a very low torque to prevent damage to the product.
• Socket Wrench Set
How to use the PARTS IDENTIFIER
Before you begin assembly, please make sure that
you have all the parts listed and in the correct
quantities. This will ensure the quickest and most
organized assembly.
Be sure to work on the assembly on a soft
non-marring surface such as carpet or the inside of
the corrugate box top to prevent causing damage
to the table surface during assembly.
Item #
1
Instructions Parts ID #
Part Name
Part Name
Part Image
Part Quantity
# 52703-QT x2
FOR USE WITH STEP # 1
Step Used In
PARTS IDENTIFIER
1
Top Board A
2
Top Board B
3
Bracket (Pre-installed)
4
Bracket (Pre-installed)
NOT Replaceable
FOR STEP 1
x1
NOT Replaceable
FOR STEP 1
x1
#33242-03ES
x4
#33242-04ES
x4
5
End Apron (1 Pre-installed)
6
Side Apron (2 Pre-installed)
7
Corner Cap (2 Pre-installed)
8
Handle
#33242-05ES
FOR STEP 3
x1
#33242-06ES
FOR STEP 3
x2
#33242-07ES
FOR STEP 5
x2
#33242-08ES
FOR STEP 5
x2
9
Front Leg (2 Pre-installed)
10
Front Leg Cross Tube
11
Inner Leg
12
Wheel
#33242-09ES
FOR STEP 6
x2
#33242-10ES
FOR STEP 7
x2
#33242-11ES
FOR STEP 8
x2
#33242-12ES
FOR STEP 8
x4
13
Inner Leg Cross Tube A
14
Right Linkage Tube
15
Left Linkage Tube
16
Long Safety Strap
#33242-13ES
FOR STEP 9
x2
#33242-14ES
FOR STEP 10
x2
#33242-15ES
FOR STEP 10
x2
#33242-16ES
FOR STEP 11
x1
3