16.11.2012 Views

Owner's Manual & Service Book - Tata Motors Customer Care

Owner's Manual & Service Book - Tata Motors Customer Care

Owner's Manual & Service Book - Tata Motors Customer Care

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SR PROBLEM OBSERVED PROBLEM CAUSE ACTION TO BE TAKEN<br />

NO<br />

BRAKES<br />

PRELIMINARY TROUBLE SHOOTING<br />

2. Brake pulling to one Oil on the brake lining Clean the brake lining.<br />

side One side shoe/ pad worn<br />

on both wheels.<br />

Get the shoe/ pad replaced<br />

Loose brake anchor plate Tighten the bolts.<br />

One side brake pipe clogged Get the brake line cleaned.<br />

One side automatic adjuster Rectify or replace automatic<br />

not functioning adjuster.<br />

3. Brake squeal Defective brake lining Replace.<br />

Glazed lining Clean or replace lining.<br />

STEERING SYSTEM<br />

1. Hard steering (Mech) Wheel alignment disturbed Check & adjust<br />

Rack & pinion need<br />

adjustment<br />

Check &replace if necessary<br />

Low tyre pressure Adjust correct value<br />

Grabbing of linkages Check & rectify<br />

2. Poor Return ability Grabbing of linkages Check & rectify<br />

Steering gear disturbed Check & adjust<br />

3. Excessive play on Rack & pinion attachment Get it tightened<br />

steering loose<br />

WIPER<br />

1. Narrow streaks are left Foreign matter has Clean the edge of the blade.<br />

on the wind shield attached to the blade if streaks still appear, replace<br />

making it hard to see the blade edge of the blade<br />

is worn out.<br />

2. The wiper leaves large Rubber deformed<br />

un-wiped spots.<br />

Replace the blade<br />

ELECTRICAL<br />

1. Battery charge & engine Battery terminal loose or Check connections.<br />

oil pressure lamp in disconnected<br />

cluster not operating Battery completely dead Get the battery charged.<br />

when key in ‘IGN’ LED fused Get the LED checked /<br />

position Replaced.<br />

Fuse blown Replace the fuse.<br />

Loose / open connections Get the battery properly<br />

connected.<br />

2. Non functioning Elect. Fuse blown in the circuit Replace the fuse if blown.<br />

accessories such as Loose connectors Get the connection properly<br />

power windows, head tightened / fixed.<br />

lamps, fuel & temp. Circuit relay/ controllers loose Fix the relay firmly.<br />

gauge, RPM meter,<br />

wiper and washer unit &<br />

all lamps etc.<br />

in the base<br />

59

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!