Measuring - sensitec

Amplifying
Charge Amplifiers for Piezoelectric Sensors
Multichannel Charge Amplifier for Lab-Applications
Type 5080A...
Technical data
Type 5080A...
Anzahl Kanäle 1 ... 8
Messbereichseinstellung
continuously variable
Measuring range FS pC ±2 ... 2 200 000
Frequency range (–3 dB) kHz ≈0 ... 200
Output signal V ±10 / –8 ... 10
Supply voltage
optional
VAC 100 ... 240
VDC 11 ... 36
Amplifier module Type optional
∙ Charge amplifier
∙ Dual-Mode (voltage/charge) with Piezotron ®
Connector Type BNC neg.
Fischer 9-pol. neg. (optional)
Deg. of protection to IEC/EN 60529
IP40
Interface RS-232C or USB 2.0
Case optional 19" casette for rack mounting
desktop unit with support bracket
Other features
∙ USB connector for parameterization
∙ Connector for remote control
∙ Display of mechanical measurand
Characteristics
This charge amplifier has outstanding
characteristics that guarantee
very accurate measurements
even for small forces. The charge
amplifier modules, of which several
variants are available, are mounted
separately into the case. This gives
the user a very flexible system that
can be adapted to the requirements
at any time.
Applications
This charge amplifier is used in all
areas of cutting force measurement
or general force measurement.
It is ideal for use with piezoelectric
multicomponent dynamometers
in laboratories, research and development.
Accessories
RS-232C cable Type 1200A27
Connecting cable for signal outputs
from the charge amplifier to the data
acquisition system
Type 1700A111A2
Connecting cable Type 1700A113A2
Data acquisition system
Type 5697A...
Inductive proximity switch
Type 2233B
Data sheets 5080A_000-744
www.kistler.com 119