NELA „HAO“ NELA „HAO“

OPERATION
The exposed offset plates are
introduced manually into the
bending machine where they
are positioned according to 3
register pins. Pressing the start
button activates the work process
of the bender, the following
steps are carried out automatically.
Register pins position the
printing plate in the pre-punched
register holes. A vacuum
lets the offset plate lie flat on the
machine table. Holding-down
devices fix the printing plate
before bending. The bending
process is carried out at both
plate edges simultaneously
using the plate-protecting foldbending-technique.
After bending,
the bending unit moves to
the middle of the machine to
facilitate manual removal of the
printing plates.
RELIABILITY
All parts in the NELA „HAO“ are
developed and designed to the
latest state of technics and
technology and manufactured
NELA „HAO“
SEMI-AUTOMATIC PLATE BENDER
The allround bender for newspaper and commercial printing – as first equipment or as a back-up
2020,5 mm
5
3
4
6
7 7
2510 mm
1
2
with highest precision. NELA
quality is guaranteed for the
manufacturing of the NELA
„HAO“ ensuring a trouble free
operation for years to come.
TECHNICAL FEATURES
� For bending of pre-punched
offset printing plates
� For single and double width
offset printing plates
� Selector switch for format selection
� The printing plates are positioned
by introducing register
pins into the pre-punched register
holes. After that the printing
plates are bent.
� Bending configuration according
to plate drawing of the
printing press manufacturer.
� Electronic control
TECHNICAL DATA
� Air-cushion facilitates handling
of the printing plates.
� Vacuum on the machine
table guarantees accurate
positioning of the printing plates
before bending.
BRÜDER NEUMEISTER GMBH
Gottlieb-Daimler-Straße 15 · D-77933 Lahr
Phone +49 78 21 5808-0
Fax +49 78 21 58 08 62
http://www.nela.de
e-mail: sales@nela.de
● Compressed 1/4“, 7-10 bar
Air supply: consumption per plate:
20NL
● Electrical supply: 1N PE AC 230V 50Hz 0,1kW
● Dimensions: length: approx. 1265 mm
width: approx. 1115 mm
height: approx. 1215 mm
● Weight: approx. 400 kg
OUR SERVICE –YOUR ADVANTAGE
� Responsive, expert consulting
� Everything from NELA – from
register bars to fully automatic
printing plate processing lines
� Installation drawings and layouts
(CAD) according to your
requirements
� Modern and reliable pneumatic
and electronic components
– the world leading
manufacturers with service
centres worldwide are our
partners.
� NELA units bear the GS safety
code and CE stamp awarded
by the Technical Control
Board and the German Employer‘s
Liability insurance.
Ask for NELA products. We or our
agents would be pleased to be
of service to you.
N.B.: Our picture shows the basic model.
Variations are possible due to userspecific
requirements. Constructional
details are subject to change without
prior notice.
Printed in Germany
5/ 98 · KD