DART-Agilent Vapur Interface Manual SI-300-A Rev 6 ... - IonSense
DART-Agilent Vapur Interface Manual SI-300-A Rev 6 ... - IonSense
DART-Agilent Vapur Interface Manual SI-300-A Rev 6 ... - IonSense
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Diagram of the <strong>Agilent</strong> Source and <strong>Interface</strong><br />
All current <strong>Agilent</strong> sources have an “i-button” attached on the left side (as you are<br />
looking down the capillary of the instrument). The dual E<strong>SI</strong> source shown below has an<br />
i-button marked “11”.<br />
Figure 1: Dual E<strong>SI</strong> source view<br />
The desolvation chamber on the <strong>Agilent</strong> systems has an electronic reader that interprets<br />
the information on the i-button. The reader is shown in the picture below at the right end<br />
of the yellow wire in Figure 2.<br />
<strong>DART</strong>-<strong>Agilent</strong> <strong>Vapur</strong> <strong>Interface</strong> <strong>Manual</strong> (<strong>SI</strong>-<strong>300</strong>-A <strong>Rev</strong> 6) 4