JD7136 TA ST manual - Ruberkon
JD7136 TA ST manual - Ruberkon
JD7136 TA ST manual - Ruberkon
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
16<br />
<strong>ST</strong>OPPING ENGINE <br />
a b c<br />
a. Pinch fuel tube to stop fuel flow.<br />
b. After stopping the engine, turn off the receiver switch first, then the transmitter.<br />
c. Be careful! The engine and muffler will be getting extremely hot during operation! Don’t touch them during or just after operation.<br />
a. <br />
b. <br />
c. <br />
17 a<br />
WHEEL AND TIRE PREPARATION <br />
b<br />
c<br />
a. Remove wheel cap crew using equipped 3mm hex wrench and detach wheels.<br />
b. Replace fresh tires and wheels if the original tires worn out seriously.<br />
c. Tighten the wheel cap screw down with the washer.<br />
a.<br />
b. <br />
c. <br />
18 a<br />
<strong>ST</strong>ORING AND MAINTENANCE <br />
b<br />
c<br />
d<br />
e<br />
a. Before storing you car, draw out any fuel from the tank.<br />
b. Next, restart the engine to combust remaining fuel.<br />
c. Unplug the glow plug and put after engine oil inside the engine, re-plug the glow plug.<br />
d. Wipe off the dirt and oil on your car.<br />
e. Make sure you have disconnected the power (batteries).<br />
a. <br />
b. <br />
c. <br />
d. <br />
e.
Change language