KDR – CaRTon LIvE SToRaGE SySTEM - SSI Schäfer

KDR Carton Live Storage
KDR Carton Live Storage
System – ESD version
i
Quality
tested and
certified
by
TÜV Rheinland
The rack with no electrostatic charging, in accordance with
ESD guidelines
The Carton Live Storage System, designed to comply with ESD
guidelines, is used to store sensitive electronic components
that could be damaged by electrostatic charging.
The system satisfi es these requirements when an
ESD-compliant fl oor is installed.
Ordering
When ordering an ESD version an -E must be added to
the article numbers for all fl ow beds.
Example:
Straight fl ow bed without ESD design
K-D-2500-1800/3
Straight fl ow bed with ESD design
K-D-2500-1800/3-E
All other technical data is the same
(pages 22 – 33 and 38 – 43).
Galvanised
All fl ow bed modular components are galvanised. This
gives them an especially abrasion-proof surface and good
conductivity.
Note
The Carton Live Storage System must be inspected by an
in-house expert before commissioning to ensure it provides
the required ESD properties.
Recommendation
Dirt, oil, grease and conversion work can all affect the ESD
properties. The Carton Live Storage System should therefore
be inspected at regular intervals by an in-house expert.
Rear
(loading side)
Reinforcing
cross beam
Pages 10/12/14
Anti-tip clip
Pages 55/56
Guide rails
Page 54
ESD roller track
Page 53
Side profile
Page 47
Frame
Pages 8 – 14
Variable
accessories
Page 51
Flow beds with
angled front chute
Pages 31 – 34
Flat flow bed with
front chute
Pages 27 – 30
Flat flow bed
Pages 23 – 26
Label holder
Page 56
Front
(picking side)
44