KDR â CaRTon LIvE SToRaGE SySTEM - SSI Schäfer
KDR â CaRTon LIvE SToRaGE SySTEM - SSI Schäfer
KDR â CaRTon LIvE SToRaGE SySTEM - SSI Schäfer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>KDR</strong> Carton Live Storage<br />
Flow bed modular components<br />
Adjusting clip for upright profiles P 63 and P 65<br />
The flow bed is height adjustable in increments of 6.25 mm, either by inserting<br />
the clip into the slot on the upright profiles, or by rotating the clip.<br />
Finish: galvanised.<br />
Upright profi les P 63 and P 65<br />
Item<br />
Order no.<br />
K-VH1 Adjusting clip for upright profi les P 63 and P 65 2009461<br />
Slotted support (outer and inner) for upright profile sections P 63 and P 65<br />
Outer – for fi tting to adjusting clip K-VH 1.<br />
Inner – for fi tting to adjusting clip K-VH1 (on all fl ow beds marked *).<br />
Finish: galvanised.<br />
Outer slotted support<br />
Inner slotted support<br />
Item<br />
Order no.<br />
K-SA1 Outer slotted support 2009462<br />
K-SI1 Inner slotted support 2009618<br />
Inner piece<br />
Front adjusting clip, with outer and inner pieces for PR 600 frame<br />
The fl ow bed is height adjustable in increments of 12.5 mm. The adjusting clip<br />
is inserted into the front upright profi le and secured by engaging the fl ow bed<br />
with the clip. Finish: galvanised.<br />
Outer piece<br />
Item<br />
Order no.<br />
Upright profi les P 73 and P 93 / P 95<br />
K-VH2 Adjusting clip for upright profi les P 73 and P 93 439500<br />
Rear adjusting clip<br />
with outer and inner pieces and spacer for PR 600 frame<br />
The fl ow bed is height adjustable in increments of 12.5 mm. The adjusting clip<br />
is inserted into the rear or centre upright profi le. The wide design of the inner<br />
piece means that the lower set of adjusting slots in the fl ow bed is covered.<br />
Allows easy front to back adjustment of the fl ow bed enabling the creation of<br />
an ergonomic pick face. When used as an inner support, the spacer can be<br />
inserted in order to reduce the adjustment increments from 12.5 to 6.25 mm.<br />
Finish: galvanised.<br />
Outer piece<br />
Spacer<br />
Inner piece<br />
Item<br />
Order no.<br />
Upright profi les P 73 and P 93 / P 95<br />
K-VH3 Rear adjusting clip for upright profi les P 73 and P 93 439510<br />
K-VH3D Spacer 442750<br />
50