Line Isolation Monitor (LIM) LIM2000plus® - Bender
Line Isolation Monitor (LIM) LIM2000plus® - Bender
Line Isolation Monitor (LIM) LIM2000plus® - Bender
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Line</strong> <strong>Isolation</strong> <strong>Monitor</strong> <strong>LIM</strong>2000plus®<br />
Technical Data<br />
<strong>LIM</strong>2000plus® Technical Specification<br />
Insulation Class in acc. to UL1022<br />
Dielectric Voltage-withstand Test<br />
1850 V (1 second)<br />
Rated Service Rating<br />
continuous operation<br />
Rated Mains Voltage of VN<br />
100…120 V AC or<br />
200…240 V AC 1ph.<br />
200…240 V AC 3ph.<br />
Frequency Range of VN 50…60 Hz (+/- 5 %)<br />
Operating Range of VN<br />
85…110 % of rated voltage<br />
Max. Power Consumption<br />
22 VA<br />
Max. Measuring Current<br />
20 μA<br />
<strong>Monitor</strong> Hazard Current<br />
100…120 V / 200…240 V max. 46 / 78 μA<br />
Min. Internal Impedance at<br />
1Ph / 3Ph (60 Hz)<br />
3.5 / 3.2 Meg Ω<br />
Nominal Response Value<br />
5 mA changeable to 2 mA<br />
Response Tolerance<br />
1.8 to 2 mA or 4.5 to 5 mA<br />
Response Time<br />
< 4 sec.<br />
Response Hysteresis<br />
20% of response value<br />
Contacts<br />
one voltage-free SPDT contact<br />
one voltage-free SPDT contact<br />
for load monitoring<br />
Outputs<br />
12 V DC, 200 mA max.<br />
remote indicator output,<br />
analog and digital display<br />
output<br />
Rated Contact Voltage<br />
250 V/24 V DC<br />
Make Capacity<br />
4 A AC/ 4 A DC<br />
Break capacity at<br />
24 V DC and L/R = 0 4 A<br />
Switching Life (240 V AC / 60 Hz)<br />
2 x 105 cycles<br />
Operation Mode<br />
continuous<br />
<strong>LIM</strong> Overload Protection<br />
built-in thermal overload with<br />
automatic reset<br />
Operating Temperature Range +32…+126 ºF<br />
0…+50 ºC<br />
Storage Temperature -13…+158 ºF<br />
-25…+70 ºC<br />
Mounting Orientation<br />
any<br />
Connector 15 pin Molex, type 03-09-2152<br />
and 12 pin Molex<br />
Communication Port<br />
RS-485 Communication<br />
Weight<br />
approx. 1.2 lb (550 gr.)<br />
Dimension Diagram <strong>LIM</strong>2000plus®<br />
(Dimensions in inch)<br />
Physical Details<br />
The <strong>LIM</strong> is less than 2-1/2 “deep. Cut-out needed for new flush panel<br />
mounting is 7“ -x 4-7/16“ (+0,-1/32“). Cut-out needed for surface<br />
panel mounting is 5-3/8“ -x 3-1/4“ (+0,-1/32“). Mounting holes are<br />
on 4“ and 6-1/2“ centers. A 15-pin and a 12-pin female Molex connector<br />
are built into the back of the <strong>LIM</strong>2000plus®.<br />
10 TDB207005usa/ 10.2008