Line Isolation Monitor (LIM) LIM2000plus® - Bender
Line Isolation Monitor (LIM) LIM2000plus® - Bender
Line Isolation Monitor (LIM) LIM2000plus® - Bender
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Line</strong> <strong>Isolation</strong> <strong>Monitor</strong> <strong>LIM</strong>2000plus®<br />
Standard Connector Plate Wiring Diagram<br />
3<br />
1<br />
2<br />
5<br />
7<br />
8<br />
4<br />
6<br />
1 - To <strong>LIM</strong>2000plus (Connector viewed from mating end)<br />
L1, L2 To secondary of <strong>Isolation</strong> Transformer.<br />
12 V DC Com. Common connection<br />
M-, M+<br />
External mA meter (400 μA)<br />
RI1<br />
Test button source<br />
K1/NC<br />
NC contact of the alarm relay K1<br />
K1/Common Common contact of the alarm relay K1<br />
K1/NO<br />
NO contact of the alarm relay K1<br />
Safe<br />
“Safe” light connection of external Remote<br />
Indicator<br />
Hazard<br />
“Hazard” light connection of external<br />
Remote Indicator<br />
RI2<br />
Local and system muting from <strong>LIM</strong> and<br />
Remote Indicator<br />
GND2, <strong>LIM</strong> GND Ground connections, if one is interrupted<br />
<strong>LIM</strong> will alarm<br />
L3/Test Remonte “Test” function or connection L3 in<br />
three phase systems<br />
2 - Connector Plate CP-<strong>LIM</strong>2000<br />
3 - Wiring Harness<br />
4 - MK2000 <strong>LIM</strong> Remote Indicator Terminals<br />
5 - To fuses or circuit breaker connected to secondary of <strong>Isolation</strong><br />
Transformer<br />
6 - optional for system muting<br />
7 - three phase system (test function not available)<br />
8 - test function with RI1<br />
9 - Panel Ground or Ground Bus<br />
CP-<strong>LIM</strong>2000<br />
9<br />
4 TDB207005usa/ 10.2008