MDR Technical Handbook.pdf - Omni Metalcraft Corp.
MDR Technical Handbook.pdf - Omni Metalcraft Corp.
MDR Technical Handbook.pdf - Omni Metalcraft Corp.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MOTOR DRIVEN ROLLER CONVEYOR STRAIGHT AND CURVE TECH HANDBOOK<br />
PRE-START-UP OVERVIEW: PREPARING FOR INITIAL START-UP<br />
1) Review pages 7 and 8 prior to starting any equipment.<br />
2) Verify that conveyor sections, leg supports, etc. were installed properly.<br />
3) Verify that all zone-to-zone cabling is connected properly.<br />
4) Verify that all sensor cabling is connected properly.<br />
5) Verify that conveyor is not loaded with product.<br />
6) Verify drive rollers are securely bolted to side frame.<br />
7) Verify all slave rollers are attached to drive roller with proper drive bands.<br />
8) Check all drive rollers, photo-eyes and drive modules for proper wiring.<br />
9) Check all drive module DIP switch settings. (DIP switches must be set before supplying power to drive<br />
modules)<br />
<strong>MDR</strong> TECHNICAL HANDBOOK 2011.1<br />
18
Change language