Perfection in Home Entertainment. - Loewe

Individual Sound
Subwoofer Highline
Aktive subwoofer, passive radiator
–
300 W / 600 W (subwoofer channel)
28 Hz –250 Hz
–
5 additional digital amplifiers (class D) for
connecting front and surround speakers:
100 watts, 4 Ohm each
i -12 dB / +12 dB
i
50 Hz –250 Hz
i
i
i
i
–
–
1 woofer
2 passive radiators
Gold-plated terminal screws
Gold-plated
–
–
i
i
i
–
Individual Sound
Subwoofer
1-way bass reflex, active
–
100 W / 170 W (subwoofer channel)
38 Hz –250 Hz (-6 dB)
–
5 additional digital amplifiers (class D) for
connecting front and surround speakers:
50 watts, 6 Ohm each
i -12 dB / +12 dB
i
50 Hz –250 Hz
–
i
–
i
1 woofer
–
–
–
5x speaker terminals (max. 1.5 mm)
Gold-plated
–
–
i
i
y
–
24.0 12.3
Individual Sound Projector.
General
Principle
Output power
Power consumption in stand-by mode
Features
Selectable night mode / Auto Setup / sound modes
Speaker complement
Connections
Accessories
Wall mount
Standard inset
Auto Setup microphone and microphone stand
System cable (RS 232)
Video cinch cable / Audio cinch cable
(analogue/digital)
Cinch-Scart / TOS-Link cable adapter
Accessories (optional)
Table Stand Individual Sound Projector
Floor Stand 5 MU SP
Individual Sound Subwoofer
Sound Projector
active
120 W
0.1 W
i/i/i
2 woofers with
2 x 20 W amplifier
40 beam loudspeaker with
40 x 2 W amplifier
Dynamic bass boost
Decoder for Dolby Digital,
Dolby ProLogic II, dts, dts Neo 6
Loewe Link system
Digital Audio In (optical)
Digital Audio In (cinch)
Analogue Audio In (cinch)
Component Video In (cinch)
Subwoofer out (Audio Link)
Composite Video Out (cinch)
Component Video Out (cinch)
Microphone input
i
High Gloss Black 2
i
i
i/i
i/i
i
i
i
Miscellaneous
Weight (approx.) in kg 11.8
Wireless Rear I Sound.
General
Digital wireless link
Transmission/reception frequency
Frequency response
Range
Frequency change
Signal-to-noise ratio
Channel separation (1 kHz)
Transmitter
Power consumption
in stand-by mode / when switched on
Receiver/Amplifier
Power consumption
in stand-by mode / when switched on
Nominal power (audio amp)
Connectors on transmitter
Analogue Audio In
Digital Audio In
Connectors on receiver/amplifier
Loudspeaker outputs
Accessories
Plug-in power supply for transmitter
Table Stand for receiver
Wall mount for receiver
Miscellaneous
Weight (approx.) in kg
Wireless Rear
i
2.4 GHz
20 Hz –20 kHz (-3 dB)
20 m indoors/
60 m outdoors
automatic
≥ 90 dB
≥ 90 dB
approx. 0.1 W / approx. 3 W
approx. 1 W / approx. 30 W
2 x 48 W
2 (3.5 mm connector)
2 (1 system connector)
2 Gold-plated speaker terminals
i
i
i
Transmitter: 0.1 kg
Receiver: 1.3 kg
118 / 119