BigIR-Mark-IV-Manual.. - SteppIR

More documents

Recommendations

Info

Warranty / Contact Information In the event you have a problem with your SteppIR product, please contact: Tech support: 425.891.6134 support@steppir.com If you need to return your antenna for repair, please go to www.steppir.com, fill out the Return for Repair form, print a copy and put it into the package that you send back to SteppIR. STEPPIR ANTENNAS LIMITED PRODUCT WARRANTY Our products have a limited warranty against manufacturers defects in materials or construction for two (2) years from date of shipment. Do not modify this product or change physical construction without the written consent of Fluidmotion Inc, dba SteppIR Antennas. This limited warranty is automatically void if the following occurs: improper installation, unauthorized modification and physical abuse, or damage from severe weather that is beyond the product design specifications. SteppIR Antenna’s responsibility is strictly limited to repair or replacement of defective components, at SteppIR Antennas discretion. SteppIR Antennas will not be held responsible for any installation or removal costs, costs of any ancillary equipment damage or any other costs incurred as a result of the failure of our products. In the event of a product failure, a return authorization is required for warranty repairs. This can be obtained at www.steppir.com. Shipping instructions will be issued to the buyer for defective components, and shipping charges to the factory will be paid for by the buyer. SteppIR will pay for standard shipping back to the buyer. The manufacturer assumes no further liability beyond repair or replacement of the product. 2112 116TH AVE NE SUITE 1-5, BELLEVUE WA, 98004 WWW.STEPPIR.COM TEL: (425)-453-1910 FAX: (425)-462-4415 26
2112 116TH AVE NE SUITE 1-5, BELLEVUE WA, 98004 WWW.STEPPIR.COM TEL: (425)-453-1910 FAX: (425)-462-4415
Page 1 and 2: BigIR - MK IV Vertical - Instructio
Page 3 and 4: SteppIR - Why Compromise? The Stepp
Page 5 and 6: Installing the BigIR Extension Tube
Page 7 and 8: BigIR EST Extension Tube Instructio
Page 9 and 10: Attaching the Telescoping Pole to t
Page 11 and 12: BigIR Mark IV Reinforcing Plate Ins
Page 13 and 14: Wind reinforcing kit installation i
Page 15 and 16: Wind reinforcing kit installation i
Page 17 and 18: Recommended Radials Figure 43 Groun
Page 19 and 20: All vertical monopoles need some fo
Page 21 and 22: Relative Gain Sufficient Radial Len
Page 23 and 24: Can’t get enough droop angle to a
Page 25: Wiring Diagram- DB25 Cable Splice 2

BigIR-Mark-IV-Manual.. - SteppIR

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?