Daelim VJF250 service manual.pdf - Mojo

CRANKCASE/TRANSMISSION/CRANKSHAFT
CRANKCASE ASSEMBLY
Install the dowel pins and a new gasket.
RH. CRANK CASE
Install the LH. crank case.
Make sure that there is no gap between the
mating surfaces of the right and left crankcase.
LH. CRANK CASE
Tighten the LH. crankcase bolts in a crisscross
pattern in 2-3 steps.
TORQUE : 1.1kgfm(11Nm)
After replacing the o-ring of the gear change
switch to a new one, coat the new o-ring with
engine oil, then install the switch pin into the
groove of the shift drum.
GEAR CHANGE SWITCH
Tighten the 4pcs of RH. crankcase bolt.
TORQUE : 1.1kgfm(11Nm)
12-11