2013 Catalog and Pricing - His Glassworks

More documents

Recommendations

Info

$HXTAL Refraction White Paper - His Glassworks$

3M Electroplated Velcro Disks These 3M diamond disks have the dot patterned electroplated diamond woven into the backing mesh creating a long lasting, high cut rate diamond pad for use on water fed right angle grinders. Stock item in 4 inch and 5 inch diameter. Size 60 grit (green) 120 grit (black) 200 grit (red) 400 grit (yellow) 800 grit (white) Set of 5 grits 4" x 1/2" 3MGE460 $60.00 3MGE4120 $51.00 3MGE4200 $43.00 3MGE4400 $33.00 3MGE4800 $33.00 3MGE4-SET $199.00 5" x 1/2" 3MGE560 $87.00 3MGE5120 $79.00 3MGE5200 $67.00 3MGE5400 $51.00 3MGE5800 $51.00 3MGE5-SET $310.00 Diamond Smoothing Resin Velcro Disks Our Diamond Resin Smoothing disks with Velcro backing are made from the same resin diamond material as our larger disks. Easy removal of material and great pre-polish surfacing make short work of clean up on small blemishes and areas already ground with plated disks. Size 100 (black) 220 (purple) 325 (maroon) 600 (red) 1200 (blue) 4" HGS4-VEL/100 $16.00 HGS4-VEL/200 $16.00 HGS4-VEL/325 $16.00 HGS4-VEL/600 $16.00 HGS4-VEL/1200 $16.00 5" HGS5-VEL/100 $19.00 HGS5-VEL/220 $19.00 HGS5-VEL/325 $19.00 HGS5-VEL/600 $19.00 HGS5-VEL/1200 $19.00 Felt and Cerium Velcro Disks We also offer a natural wool felt disk in 4 and 5 inch for use with cerium slurry for polishing with a water-fed right angle grinder. For polshing without cerium slurry, we offer 3M’s cerium impregnated material in 4 and 5 inch for polishing surfaces with just water. Pad Type 3" 4" 5" Natural Felt FW30250 FW40250 FW50250 $8.24 $11.00 $16.00 Cerium Impregnated N/A 3MGE4-CEO $12.00 3MGE5-CEO $15.00 4 p 828-254-2559 • tf 800-914-7463
Electrostatic diamond disks from 3M have diamonds that are adhered onto a paper backing and electrostatically charged as they bond. The diamonds give an absolutely beautiful surface for slight blemish removal and clean up and prepolish from the Electroplated disks. The Electrostatic disks do not last as long as the rein based smooththing disks. 3M Electrostatic Velcro Disks 675L 120 grit 120µ 200 grit 74µ 300 grit 45µ 400 grit 30µ 600 grit 20µ 4" X 1/2" 3M675-4(120) $5.00 3M675-4(200) $4.50 3M675-4(300) $4.50 3M675-4(400) $4.50 3M675-4(600) $3.50 5" X 1/2" 3M675-5(120) $7.50 3M675-5(200) $7.00 3M675-5(300) $7.00 3M675-5(400) $7.00 3M675-5(600) $5.50 Polpur’s Lapi-T material is an embedded abrasive disk that is fantastic for cleaning up areas already ground with rougher diamond grits. The Lapi-T wheels leave a clean surface that can be left “as-is” or moved to a polish with cerium slurry and the white MH-T disk. The Snail Lock attachment makes for easy centering and grit changes. Polpur Lapi-T Snail Lock Disks Size Pink Violet Orange Green Blue Black MH-T 4" LAPIT/GE- PINK $40.00 LAPIT/GE- VIOLET $40.00 LAPIT/GE- ORANGE $40.00 LAPIT/GE- GREEN $40.00 LAPIT/GE- BLUE $40.00 LAPIT/GE- BLACK $40.00 LAPIT/GE- MHT $35.00 Have you ever had interior curves in your work that were too hard to polish out by hand, but your flat disks wouldn’t work either. These little convex disks work great on a right angle grinder for smoothing out texture and blemishes in curved surfaces. 3 Inch Convex Diamond Disks 30 Grit 50 Grit 100 Grit 200 Grit 400 Grit 800 Grit 1500 Grit 3000 Grit 19033 $33.00 19034 $29.80 19035 $23.30 19036 $23.30 19037 $23.30 19038 $23.30 19039 $23.30 19040 $23.30 www.hisglassworks.com 5
Page 1 and 2: StarLap plated diamond disks have a
Page 3: StarLap plated diamond disks have a
Page 7 and 8: For a more consistent grind and les
Page 9 and 10: If you’re working on smaller, har
Page 11 and 12: An alternative to our resin bonded
Page 13 and 14: An alternative to our resin bonded
Page 15 and 16: These electroplated diamond cones a
Page 17 and 18: With a microscopic pyramid design o
Page 19 and 20: With a microscopic pyramid design o
Page 21 and 22: Trizact belts in 3M's 272LA family
Page 23 and 24: Sintered core drills work more effi
Page 25 and 26: Sintered core drills work more effi
Page 27 and 28: Perfect for creating glass to glass
Page 29 and 30: Type tip diameter 120 grit 260 grit
Page 31 and 32: 1/8" Shank Sintered Diamond Points
Page 33 and 34: For quick cleanup on curved areas o
Page 35 and 36: For controlled cuts with minimal ed
Page 37 and 38: For controlled cuts with minimal ed
Page 39 and 40: HXTAL NYL-1 is the world renowned e
Page 41 and 42: Dispensing the correct amount of ep
Page 43 and 44: To keep your pieces from shattering
Page 45 and 46: Superox 100T Cerium Oxide from Ferr
Page 47 and 48: Superox 100T Cerium Oxide from Ferr
Page 49 and 50: 8 Inch Mini Grinder The 8 inch mini
Page 51 and 52: Rociprolaps Rociprolaps are easily
Page 53 and 54: Free Standing Grinding Lathe If you
Page 55 and 56:
Variable Speed Right Angle Grinder
Page 57 and 58:
All of the Flex Grinders have “sn
Page 59 and 60:
MK 100 Wet Saw Husqvarna Gemini Tau
Page 61 and 62:
Cyclone E500 Sandblaster Cyclone’
Page 63 and 64:
We always have two or three of thes
Page 65 and 66:
We always have two or three of thes
Page 67 and 68:
Coldworking glass requires water an
Page 69 and 70:
For the ins and outs of fused glass
Page 71 and 72:
For applying water precisely where
Page 73 and 74:
Hang Your Glass - Locking Stand Off
Page 75 and 76:
Hang Your Glass - Super-Duty Stand
show all

2013 Catalog and Pricing - His Glassworks

Create successful ePaper yourself

Delete template?

Save as template?