SY250F General Service - Scorpa

General informations
6.4.2 Oil change
1. Start the engine and let it warm up for a few minutes, and after that switch it off.
2. Put an oil change tray under the oil drain plug. It will help you to collect the old oil.
3. Unscrew the cap and the drain plug. The oil should begin to flow.
4. Once all the evacuated oil of the engine, screw up the drain plug.
5. Fill the engine with Motul oil 300 V 100 % synthesis-ester-SAE 10w40 four strokes high
performances by the opening of filling by taking care to check the oil level with the stopper of
filling.
6. Start the engine and to let it heat a few minutes, then to switch it off.
7. Check the oil level again (see paragraph on the control of the oil level).
56