SY250F General Service - Scorpa
SY250F General Service - Scorpa
SY250F General Service - Scorpa
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>General</strong> informations<br />
WARNING<br />
Don’t touch immediately the disc or the brake pads after use, you are likely to burn you.<br />
6.14.4 Brake fluid level control :<br />
If the level of brake fluid is not sufficient, that may create air bubbles in the hydraulic circuit,<br />
so that the brakes could work badly. The consequences could be very serious for the rider.<br />
The regular check (before each use of the bike) and the filling up are essential.<br />
The fall of the brake fluid level may be caused by an excessive pads wear or by bubbles in<br />
the hydraulic circuit. In this case, it is recommended to make sure the circuit is not cracked<br />
and there is no leak too.<br />
A few precautions will help you to check and maintain at the best the brake circuit of your<br />
bike<br />
82
Change language