Alignment system package V .A.G 1920 : - Carbesa AG
Alignment system package V .A.G 1920 : - Carbesa AG
Alignment system package V .A.G 1920 : - Carbesa AG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Alignment</strong> <strong>system</strong> <strong>package</strong> : V.A.G <strong>1920</strong>
<strong>Alignment</strong> jig V.A.G <strong>1920</strong>/1:<br />
The alignment jig V.A.G <strong>1920</strong>/1 is a sturdy steel welded construction with flat milled surfaces upon which<br />
modular cross members V.A.G 1392 are mounted. All existing and future straightening brackets for the entire<br />
Volkswagen and Audi model range can be installed on the modular cross members, as well as vehicles of other<br />
manufacturers.<br />
Thanks to a generous width and a length of 4.30 m, the alignment jig is particularly suitable for longitudinal<br />
member pulling measures and also repairs on commercial vehicles. A quick anchoring <strong>system</strong> allows rapid and<br />
variable adjustment of the wheel mountings and anchoring clamps on the box profile of the alignment jig.
<strong>Alignment</strong> unit with foot pump V.A.G <strong>1920</strong>/2:<br />
Together with alignment jig V.A.G <strong>1920</strong>/1, the hydraulic alignment<br />
equipment V.A.G <strong>1920</strong>/2 forms a platform upon which simpler and faster<br />
body repairs are possible thanks to the improved means of control and a<br />
larger swivel range of the pulling arm.<br />
The force is generated with the aid of a pneumatic-hydraulic pump. The<br />
alignment unit can be attached at almost any position on the alignment jig<br />
thanks to a quick anchoring <strong>system</strong>.<br />
The design of the equipment allows a range of pulling measures,<br />
for example<br />
- Direct pull with chain and pulling arm<br />
- Simultaneous pull at two points<br />
- Pushing and pulling work, simultaneous pull<br />
downwards via relay roller<br />
- 3 point pull
Accessory trolley for alignment <strong>system</strong> V.A.G <strong>1920</strong>/3:<br />
The accessory trolley V.A.G <strong>1920</strong>/3 serves as a means of<br />
storing the attachment parts with a good overview, e.g.<br />
anchoring clamps and other aids of body alignment <strong>system</strong><br />
V.A.G <strong>1920</strong>.<br />
Items supplied<br />
<strong>Alignment</strong> jig V.A.G <strong>1920</strong>/1<br />
<strong>Alignment</strong> unit with foot pump V.A.G <strong>1920</strong>/2<br />
Accessory trolley for alignment <strong>system</strong> V.A.G <strong>1920</strong>/3<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH<br />
ASE 406 451 00 000
Basic straightening bracket set V.A.G 1610<br />
A straightening set (for bracket sets) consists of a basic set and a bracket set corresponding to the vehicle.<br />
The basic set V.A.G 1610 will accept all bracket sets for current and future models of the VW and Audi range.<br />
- The assembly of the basic set is done according to the isometric diagram as with previous<br />
straightening bracket sets<br />
- Quick and trouble-free diagnosis can be carried out using this <strong>system</strong><br />
- Tools are not required to assemble the bracket sets<br />
- Two height settings allow the bracket sets to be positioned either for vehicles with assemblies<br />
fitted or removed<br />
- By using a ram, it is possible to apply pressure in the upwards motion<br />
- During the straightening process the mountings can be released from the bracket by pulling out<br />
the retaining pin<br />
Items supplied<br />
22 pillars, 2 plates, 10 bolts<br />
Recommended accessories<br />
Extension plates to set up the straightening bracket set<br />
for Audi 200/Audi V8 (long version)<br />
1 set of 2 plates<br />
V.A.G 1610/1, ⇒ ASE 406 252 00 000<br />
Additional mounts for straightening bracket set Crafter 2006><br />
1 set = 14 items<br />
V.A.G 1610/2, ⇒ ASE 433 316 00 000<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH<br />
ASE 406 240 00 000
VAS. 6630<br />
New MZ+ System<br />
under processing<br />
Specific tops<br />
Universal set of 34<br />
Pistons VAS. 6630<br />
Universal set of 22<br />
MZ Towers V<strong>AG</strong>. 1610
Basic equipment V.A.G 1366/3<br />
For alignment using straightening device<br />
V.A.G 1366<br />
Items supplied<br />
Pulling clamp 100 mm<br />
Pulling clamp 45 mm<br />
Multi-purpose pulling arm with<br />
plate and pin<br />
Pulling chain, approx. 2.5 m long,<br />
with 2 hooks<br />
2 pulling chains, approx. 2.5 m long,<br />
with 1 hook<br />
Rubber cap Ø 85 mm<br />
Universal clamp<br />
Pulling ring<br />
Manufacturer<br />
Celette GmbH<br />
ASE 406 155 00 000<br />
Modular traverse V.A.G 1392/1<br />
Single modular traverse for fitting<br />
Audi V8 straightening bracket set<br />
(long wheel base)<br />
Sturdy and robust steel welded<br />
construction with interchangeable nut<br />
cages.<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH<br />
ASE 406 164 00 000
Additional traverses V.A.G 1392/2<br />
The additional traverses are a<br />
supplement for straightening bracket set<br />
Crafter 2006><br />
VAS 6403<br />
Items supplied<br />
1 set = 2 items<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH<br />
ASE 406 165 00 000<br />
Mechanical door tensioner<br />
V.A.G 1438<br />
Used to maintain correct door aperture<br />
size during bodywork repairs and as an<br />
aid when welding-in various sheet<br />
metal components.<br />
Used also for light alignment.<br />
Suitable for all Volkswagen/Audi<br />
vehicles.<br />
Manufacturer<br />
Celette GmbH, Kehl<br />
ASE 406 158 00 000
Dent removal kit, 10 t V.A.G 1512A<br />
Practical supplementary tool for all straightening work<br />
Items supplied<br />
Hand pump with hose and half coupling<br />
Pressure cylinder 10 t<br />
Extension 125 mm<br />
Extension 250 mm<br />
Extension 500 mm<br />
Extension 700 mm<br />
Coupling STEK connector<br />
Thrust piece, serrated<br />
Prism element<br />
Wedge element<br />
Flat foot plate<br />
Rubber cap. Ø 85 mm<br />
Carrying case<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH, Kehl<br />
ASE 406 161 00 000
Pneumatic-hydraulic foot pump<br />
V.A.G 1513A<br />
The straightening device V.A.G 1366<br />
(supplied with hand pump as standard) can<br />
be converted for foot operation with foot<br />
pump V.A.G 1513 A. This is advantageous<br />
as both hands are then free for<br />
straightening, and pressure is built up more<br />
quickly, which saves time.<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH, Kehl<br />
ASE 406 154 00 000<br />
Hydraulic hand pump V.A.G 1515A<br />
The straightening device V.A.G 1366/1<br />
(supplied as standard with a foot pump) can<br />
be converted to hand operation with hand<br />
pump V.A.G 1515 A<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH, Kehl<br />
ASE 406 156 00 000
Double hook V.A.G 1555<br />
When straightening bodywork using<br />
straightening tools, different lengths of<br />
tensioning chain are required. The use of<br />
double hook V.A.G 1555 allows a chain to<br />
be extended by connection to another<br />
chain and also allows shortening of a chain<br />
by means of hooking it onto its links to<br />
attain the required length.<br />
The double hook V.A.G 1555 is also<br />
included in the items supplied of<br />
V.A.G 1366/4 A.<br />
Warranty<br />
24 months<br />
ASE 406 217 00 000<br />
Safety cable V.A.G 1559A<br />
The safety cable is designed to prevent<br />
accidents, which could occur if the tensioning<br />
chain were to break or if the tensioning clamp<br />
or hook were to slip despite all safety<br />
precautions.<br />
The safety cable is attached to the chain and<br />
to the alignment jig/straightening device by<br />
quick-release hooks and thereby prevents<br />
potential risk of whip from a broken chain.<br />
ASE 406 172 00 000
Extension plates V.A.G 1610/1<br />
Recommended accessory for assembling<br />
straightening bracket set, Audi V8<br />
(oversize).<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette, Kehl<br />
ASE 406 252 00 000<br />
Quick pull clamp, 50 mm V.A.G 1749<br />
Accessory for V.A.G straightening<br />
<strong>system</strong>. 50 mm wide self-locking clamp<br />
for all types of pulling operations.<br />
Pre-tensioning by screwing on is no<br />
longer necessary. Simple attachment to<br />
a chain link enables rapid attachment<br />
and removal. The special toothed profile<br />
ensures a secure grip on the bodywork.<br />
ASE 406 320 00 000
Dent removal kit, 4 t V.A.G 1746<br />
Accessory for the V.A.G straightening <strong>system</strong>. The 4 tonne hydraulic dent removal kit is<br />
an indispensable supplement for low pressure work in confined body parts.<br />
Items supplied<br />
Included in a metal box are the following:<br />
495 mm extension<br />
420 mm extension<br />
215 mm extension<br />
125 mm extension<br />
85 mm extension<br />
Prism adapter<br />
Coupling<br />
4 t hand pump<br />
4 t cylinder with 125 mm stroke<br />
Spreader<br />
70 mm rubber cap<br />
Base plate<br />
Cylinder body attachment<br />
Piston rod attachment<br />
Wedge attachment<br />
Fluted thrust piece<br />
1.80 m long hose with half coupling<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH, Kehl<br />
ASE 406 323 00 000
Relay roller with hook V.A.G 1751<br />
The use of a pulley allows pulling in all<br />
directions when straightening the<br />
bodywork. The hook is attached to the<br />
alignment jig, the straightening device or<br />
the modular member and the chain is<br />
pulled over the pulley.<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH, Kehl<br />
ASE 406 322 00 000<br />
Portal gauge VAS 5007<br />
Together with the relevant vehicle-specific supplement,<br />
the portal gauge VAS 5007 permits measuring and<br />
repair of the A, B & C pillars. The door hinges and the<br />
locking pin mountings are the check points.<br />
The supplements have the identification colour of the<br />
vehicle-specific straightening bracket sets.<br />
Items supplied<br />
2 alignment jig extensions<br />
2 connecting pins (mounting for cross member)<br />
1 cross member (mounting for supplement)<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette, Kehl<br />
ASE 433 001 00 000
Suspension strut alignment <strong>system</strong><br />
VAS 5121A<br />
The suspension strut alignment <strong>system</strong><br />
VAS 5121 A is required on vehicles with<br />
4 link front suspension.<br />
Audi: A4´95, A4´01, A6 '98, A8<br />
VW: Passat ´97<br />
Items supplied<br />
1 suspension strut alignment <strong>system</strong><br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH, Kehl<br />
ASE 433 306 00 000<br />
Tensioning straps VAS 6123<br />
Application: Straightening work for body repair<br />
Items supplied<br />
1 x tensioning strap 0.75 m<br />
1 x tensioning strap 1.50 m<br />
Warranty<br />
24 months<br />
Manufacturer<br />
Celette GmbH, Kehl<br />
ASE 433 315 00 000