EMI-EMC Analysis and Noise Reduction on PCB

� Probe placement <strong>and</strong> Impedance
measurements
� Need connectors; difficult to place
in crytical points of PCB
� Timing of Digital lines
� Laborator measurements;
different instruments needed
(oscilloscope; logic analyzer etc.)
<strong>and</strong> difficult to place many probes
� Near Field Calculation probying all
over the PCB
� Manual Probe or Near Field Array
Scanner measurements needed
� Emission Tests
� Anechoic chamber measurements
PCB Prototyping
MEASUREMENTS
PERFORMED
<strong>EMC</strong> Issue?
DESIGN
SYSTEM
MANUFACTURE
PROTOTYPE
TIME & COSTS INCREASE !