EMI-EMC Analysis and Noise Reduction on PCB

More documents

Recommendations

Info

Step #1: Plane Impedance Simulation Simulation Correlation 1.17 GHz Step #4: Near Field <strong>Analysis</strong> around PCB Step #2: Resonant Mode @1.17GHz Step #3: Far Field Emission Test @ 3meters 1.17 GHz
Add 2 decoupling capacitor on hot spots to filter resonance mode @ 1.17GHz What-IF <strong>Analysis</strong> Filter Impedance Spike
Page 1 and 2: EMI-EMC</s
Page 3 and 4: Coupling process Conduction Conduct
Page 5 and 6: � Loops in which currents flow ac
Page 7 and 8: Low |Z| at 50 MHz Near-Fields from
Page 9 and 10: Pwr Noise Signal P
Page 11 and 12: MIXED SIGNAL PCB Virtual Prototypin
Page 13 and 14: SIWAVE Physical Model Extraction FP
Page 15 and 16: Layout Import and
Page 17 and 18: 5 Steps for EMC <s
Page 19 and 20: Plane Impedance Simulation PWR Impe
Page 21 and 22: Step 2 Decoupling Capacitor <strong
Page 23 and 24: Resonance Simulation � Scans enti
Page 25 and 26: PCB Resonances and
Page 27 and 28: Choosing Correct Capacitor � Buil
Page 29: Impedance and Volt
Page 33 and 34: What-IF Analysis:
Page 35 and 36: SIwave - EM Model Extraction � SI
Page 37 and 38: V(U28_DQ10_D3) [V] V(U28_DQ10_D3) [
Page 39 and 40: 1.90 1.85 1.80 1.75 1.70 1.65 What-
Page 41 and 42: Real EMI Source in
Page 43 and 44: WRITE DDR READ DDR Emission <strong
Page 45 and 46: Step 5 Enclosure Simulation 1) Impe
Page 47: MICROPROCESSOR CKP CKN DDR SDRAM U2

EMI-EMC Analysis and Noise Reduction on PCB

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?