A223 Action on Hearing Loss Smoke Alarm
A223 Action on Hearing Loss Smoke Alarm
A223 Action on Hearing Loss Smoke Alarm
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6.3 REPLACING THE BATTERY<br />
IMPORTANT: The system must always have a battery c<strong>on</strong>nected.<br />
Always test the RNID <strong>Smoke</strong> <strong>Alarm</strong> for correct operati<strong>on</strong> using the<br />
test procedure (see “TEST THE SYSTEM”), whenever the batteries<br />
are replaced.<br />
REPLACING THE BATTERY:<br />
1. Turn the system off, see “TURNING THE SYSTEM OFF” <strong>on</strong><br />
page 15 for details.<br />
2. Remove the battery cover <strong>on</strong> the bottom of the BASE<br />
UNIT 2.<br />
3. Unplug the battery from its c<strong>on</strong>nectors.<br />
4. Remove the battery and replace. Use <strong>on</strong>ly manufacturers<br />
recommended replacement battery.<br />
5. Dispose of the old battery according to the instructi<strong>on</strong>s <strong>on</strong><br />
the battery.<br />
6. Plug new battery into the c<strong>on</strong>nectors, make sure that it is<br />
c<strong>on</strong>nected the right way round.<br />
7. Refit the battery cover.<br />
8. Turn the system <strong>on</strong>; see “POWER THE SYSTEM” <strong>on</strong> page 12<br />
for details.<br />
23
Change language