A223 Action on Hearing Loss Smoke Alarm
A223 Action on Hearing Loss Smoke Alarm
A223 Action on Hearing Loss Smoke Alarm
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.1 Locate <strong>Smoke</strong> Detector<br />
a. Find a suitable locati<strong>on</strong> for the SMOKE DETECTOR 1 and<br />
install according to the manufacturers instructi<strong>on</strong>s. This is<br />
very important because locati<strong>on</strong> is a major factor in how well<br />
a smoke detector works.<br />
IMPORTANT:<br />
Your system is supplied with a single DICON SAFETY<br />
PRODUCTS LTD MODEL: Micro 300 IONIZATION SMOKE<br />
DETECTOR.<br />
Up to 9 additi<strong>on</strong>al SMOKE DETECTORS may be c<strong>on</strong>nected to<br />
the system refer to “ADVANCED INSTALLATION” <strong>on</strong> page 18 for<br />
details.<br />
NOTE:<br />
The Micro 300 IONIZATION SMOKE DETECTOR is powered<br />
from the BASE UNIT 2 , no batteries are required.<br />
b. The SMOKE DETECTOR 1 is supplied with a standard<br />
10m cable and plug for c<strong>on</strong>necti<strong>on</strong> to the JUNCTION<br />
BOX 3 . This cable should be routed to the JUNCTION<br />
BOX 3 and fixed as necessary.<br />
The standard 10m cable supplied may be extended, or<br />
shortened, if required. Refer to “ADVANCED INSTALLATION”<br />
<strong>on</strong> page 16 or 17 for details.<br />
7
Change language