Elite CS-18 - Teledyne Coax Switches

CW (Watts)PowerIL dBLossReturnIsolation dBSpecificationsRF Contacts:Break before makeActuator Voltage (VDC) 20 O C 12 15 28Switching Time:Connectors:Weight:Current (mA) 600 480 27020 msec maxEliteCS-18High Power DC-12GHz Multi - Throw SwitchSP3T to SP6T versions onlyNormally OpenSMA (f), TNC(f)(max frequency 11GHz only)*, N Type (f)9 oz. max (3 Position) 11 oz (6 Position)Temperature Range: -55 O C to +85 O C (Operating)Shock:Vibration:Humidity:Typical Contact Life:RF Power HandlingMIL-STD-202 Method 213, Condition D (500G Non Operating)MIL-STD-202 Method 214, Condition D (10G RMS Non Operating)Moisture Seal Available5 Million CyclesThe CS-18 Switch is a broadband multi-position coaxial switch designed to switch RFsignals from one input port to any one of 3 through 6 output ports. It is readily adapted to any50 Ohms transmission line system. The standard actuator gives individual solenoid control ofeach position and when de-energized, all positions are open. Standard actuator voltage is 28VDC. The primary advantage of this switch over the miniatureversions shown on previous pages is the higherpower handling capability.SP7T and SP8T version available. See additionaldatasheets3000Typical PerformanceHigh Power Connectors800Standard N Type Connectors40020080154025100.1 1.0 4.0 10 18 26.5Frequency GHz0.00.01 12.0Frequency GHzSpecifications DC-1 GHz 1-4 GHz 4-12 GHz (TNC 11GHz only)VSWR (max) 1.25:1 1.40:1 1.70:1Insertion Loss (max) 0.30 dB 0.40 dB 0.50 dBIsolation (min) 70.0 dB 60.0 dB 60.0 dB0.40.01 Frequency GHz6070809012.0Specifications subject to change without notice.www.teledynecoax.comemail: coax@teledyne.comTel: (800) 351-736810/2007

EliteCS-18High Power DC-12GHz Multi - Throw SwitchSP3T to SP6T versions onlyNormally OpenAnalogTTLIndicatorsSP6TH = 2.15 STD ModelH = 2.65 TTL ModelSP5TSP4TSP3TPart Numbering System for CS-18 (Normally Open)CS-18 N 1 5 O - TConnectorS: SMA FemaleN: N type FemaleT: TNC Female*SeriesConnectorsFor other options contact FactoryActuator VoltageActuator Voltage1: 28Vdc Normally Open2: 15Vdc Normally Open3: 12Vdc Normally OpenOptionsActuator TypeNumber of Switch PositionsNumber ofPositions3: SP3TActuator TypeO: No Indicator ContactsC: Indicator ContactsOptionsT: TTL Drivers with DiodesR: Positive + Common4: SP4TTD: TTL Driver with Decoder5: SP5T6: SP6T See additional Datasheet for SP7T and SP8T versionsSpecifications subject to change without notice.www.teledynecoax.comemail: coax@teledyne.comTel: (800) 351-736810/2007