random access device - Radim S.p.A.

ASSAY METHOD:
PRODUCTIVITY:
WALK AWAY:
OPERATING MODE:
DISPENSING SYSTEM:
WASHING SYSTEM:
INCUBATION / REACTION:
ALIQUOTE SYSTEM:
THERMOSTAT:
READER:
SAMPLES:
REAGENTS:
CALIBRATION:
QUALITY CONTROL:
PATIENT FILE:
SOFTWARE:
HOST CONNECTION:
OPERATING CONDITIONS:
POWER SUPPLY:
CONSUMPTION:
SAFETY STANDARDS:
ELECTROMAGNETIC COMPATIBILITY:
IVD:
DIMENSIONS AND WEIGHT:
FIA
TECHNICAL FEATURES
Fully automated Random Access System in fluoroimmunoassays
Up to 120 tests/hr
400 tests
Continuous loading of reagents, samples, calibrators, controls, pre-dilution cuvettes, reaction cuvettes and
substrate. Simultaneous management of all the methods. Automatic substitution of the finished common
reagents by continuous access. Separated solid and liquid waste station
XYZ type with 2 independent needles and 2 500 µL syringes. (Optional) disposable tips. Capacitive
coagulation level sensor (sensitivity 150 µL). Precision CV < 3% volume from 5 to 100 µL
Two washer stations used for sedimentation, washing of the cuvettes and dispensing of the substrate
180 positions’ station where the incubation and the reaction take place in orbital shake and at controlled
temperature (37°C)
On board for STAT
Dry, at 37°C with ± 0.5°C precision. Heating up time 5’
Fluorescence reading through led source with excitation at 370nm and revelation at 450nm
Up to 120 samples on board (6 racks, 20 positions each). Continuous loading for routine and STA
Primary, secondary tubes (12/16 mm) and paediatric cuvettes handling Positive identification by barcode
reader Automatic predilution (56 positions) Automatic aliquote system on board Automatic dilution of outside
range samples Reflex test
Dedicated reagent pack for 50,100,150 or 200 tests 12 weeks stability on board; 20 different methods on
board (up to 200 determinations each) 20 barcode identifiable positions for reagents Refrigerated reagent
plate (4-8°C) Continuous loading without interruption to workflow
Single use calibrator pack Positive calibrator identification via barcode reader; Two point calibration on Master
Curve plus two control points Up to 4 weeks calibration stability
Internal Quality Control management applying Westgard rules and Levy-Jennings charts
Search for patients by ID, name, data and test Printing session report Printing patient report
Multitask and Multilanguage interface Operating System: Windows XP or superior Touch Screen Monitor
Bidirectional with serial port (RS232 interface), Web, ASTM
15 – 32°C Temperature while operating; Maximum relative humidity 80%
100 – 240 VAC; 50 – 60 Hz
600 VA
Directive 2006/95/EC
Directive 2004/108/EC
Directive 98/79/EC
L.143 X W.78 X H.145 cm - 200 Kg
5