random access device - Radim S.p.A.

PREANALYTICAL SYSTEM
AUTOMATED TEST TUBE SAMPLE LABELLING SYSTEM
74
cod. 011140000
SprintLab is an automated test tube sample labelling system.
The system prepares labels and test tubes for patients at the collection point, reception and
at ward according to the information received from the LIS.
The system has been designed to manage the blood collection process in order to eliminate
human error from the pre-analytical phase with greater efficiency for the entire analysis
process. Due to the exclusive “EDGE SENSOR” system, which allows a label to be correctly
positioned over the original label, SprintLab guarantees the correct positioning of the label
onto the sample tube This will leave a part of the tube clear in order that it may be inspected
visually for the presence of clots or heamolysis etc. This will also leave the level reference
mark clear on the original label.
SprintLab is handled by an Internal PC with 6.4’’ LCD touch-screen colour display. It is
equipped with 2 printers:
- with dispensers to label test tubes and with cutters
- to print additional labels for sample containers not directly handled by the systems
The barcode reader can be used to collect patient information in order to produce the required labelled test tubes and
additional labels.
The lower module of the system is composed of 3 extractable trays, each one containing 3 racks for tubes of different
sizes, for a total of 9 racks. The racks can hold 50 tubes (13 mm) or 40 tubes (16 mm). Tubes, placed in the appropriate
racks, are automatically picked up, labelled and gathered in the collection area for each patient. The number of tubes
available is automatically updated. The complete set of labelled test tubes and additional labels are gathered into the
final collection area.
SprintLab can be used directly in the ward with a configuration that includes larger wheels and special handles for
improved maneuverability within the ward. The system is light with reduced dimensions in order that it can be used
easily, either in the corridor, a patient’s bedside or emergency wards (Emergency, Trauma, reanimation etc).
OPTIONAL SprintLab Monitor software NEW is dedicated to the monitoring of installed SprintLabs by dedicated systems
staff. The Sprinlab Monitor allows realtime management and reporting of the SprintLab functions and status
including tube and label availability.
SprintLab light NEW is the desktop system, therefore with no sample tube management, designed soley for the printing
of labels for use on secondary containers for biological samples or samples collected away from the collection point.