Belinea b.center Software Manual - MaxData

AdministratorFunction: Administrator accessUse this function to restrict access to the server administration.Set portYou can change the HTTPS port (default 443).IP addressYou can assign IP addresses (separated by a semicolon) that are allowed to access theserver's web interface for administration. This field left blank means no restriction.Lock console without passwordDisables access to the console.Lock console with passwordTo get access to the console you need to type a password. Note that this password shouldbe exactly 8 characters long and include only 1–4 digits.Unlock consoleUnrestricted access to the console./ NotePlease use the IP address feature with caution if the computers in the network receive theirIP addresses via DHCP: The current IP may change after the lease ends.Please use the Lock console feature with caution: You will not be able to reset default administratoraccess from the console in case of any mistake in setting the IP address.In case you need to restore the default settings, please refer to the manual.40 Description of Functions