Belinea b.center Software Manual - MaxData

Function: Remote console accessUsing this function, you can manage console tools remotely by ssh protocol (secure shell).Default user is 'cli' and you cannot change it, but password can be changed.Allow IPYou can assign IP addresses (separated by a semicolon) that are allowed to access theserver remotely. This field left blank means no restriction.Set portDefault port is 22222 for security reasons, because high ports are invisible for port scanners.You can change it to any port between 1024 and 65535 except for ports that are in use.PasswordMinimum length of password is 8 characters. Be sure to use strong passwords.Confirm passwordPlease retype your new password.The password cannot contain:• the following characters: ' " ` ^ & $ # [ ] \ / | *• spaces.To connect to the server from Linux/MacOSX systems use:ssh -2 -p 22222 -l cli address_ipwhere:• option: -2 is a version of ssh protocol used for connection.• option: -p is a port for Remote Access.• option: -l is a user (in our product the user must be “cli”).• option: address_ip is the address of the server you want to connect to.You will be asked for the password you entered on the server for Remote Access.44 Description of Functions