Educational solutions - Schneider Electric

Measurement and control benchTeaching objectives@ To study and implement analoguemeasurement sensors@ To study the related electrical and electronicassemblies@ To study analogue-to-digital anddigital-to-analogue conversions@ To understand PID regulationElectrical andmechanical data@ Power supply:230 V single phase + ground / < 130 VA@ Size (H x W x D) - weight:560 x 470 x 330 mm - 20 kgMain industries@ Electrical engineering@ Mechanical engineeringPackage descriptionThe measurement and control bench includes five workstations:@ weight measurement (plastic, aluminium or steel) by a strain gauge@ no-contact distance measurement with an industrial analogue photoelectricsensor@ contact distance measurement with a linear potentiometer@ speed control (PID) with a motor and a speed controller with atacho-generator feedback@ heat control (discrete and PID) with a mini-enclosure equipped with aheating system (lamp), temperature measurement device (PT100 probe+ interface) and an interference system (fan).A TSX Micro PLC (digital 16I/12O, analogue 8I/2O) is used to controlthe workstations and run them from:@ a Magelis type terminal@ preset PL7 operating monitors@ Ethernet links (ETZ510 plug-in and HTML pages).The discrete PLC inputs/outputs and measurement sockets can also be usedon 4mm safety terminals.Software is provided to view speed and temperature change curves on a PC.To orderMD1AA620: measurement and control benchEducational solutions catalogue 2010-201155