Educational solutions - Schneider Electric

TSXBT control deskTeaching objectives@ To use a control panel to drivean operating section@ To programme a TSX Micro PLC using PL7Micro, PL7 Junior or PL7 Pro software@ To programme a Magelis dialogue terminalusing XBTL1003 softwareElectrical andmechanical data@ Power supply:230 V single-phase + ground / < 150 VA@ Size (H x W x D) - weight:620 x 624 x 380 mm - 21 kgMain industry@ Electrical engineeringOther industries@ Mechanical engineering@ Industrial technologyPackage descriptionThe console includes a Magelis dialogue terminal, a TSX Micro or M340 PLCwith inputs/outputs connected to safety sockets or connectors to be linked withyour operating sections.TSX Micro equipped with:@ discrete 16E/12S TSXDMZ28DR card@ analogue 4E TSXAEZ400 card@ analogue 2S TSXASZ200 card@ a TSXETZ510 Ethernet module.M340 version equipped with:@ an Ethernet/Modbus CPU@ a BMXDDM32 card (16I/16O)@ a BMXAMM0600 card (analog 4I/2O)The discrete and analogue inputs are wired to a Jaeger connector.The discrete inputs are also wired to status simulation switches.The discrete and analogue outputs are connected to double-sink safety sockets.Cables included:@ set of I/O cables with Jaeger plugs@ PC/TSX link cable@ PC/XBT link cable.Operator dialogue:@ Magelis XBTR with 4 lines of 20 characters@ 12 function keys and 6 service keys.There is a switch to use the Magelis without altering the wiring:@ in programming mode from a PC equipped with XBTL software (not included)@ in operating mode from the TSX Micro.A simulator can be provided solely with the TSX Micro version.This simulator allows twelve discrete outputs, one input and one analogueoutput to be tested.To orderMD1AE160ETH: TSX Micro panel with ETH plug-inMD1AE165: M340 panel with modbus and EthernetMD1AE169: simulator for TSX Micro control deskEducational solutions catalogue 2010-201157