Educational solutions - Schneider Electric

Automation modular offer:operational partTeaching objectives@ To connect an operational partto a PLC@ To use a basic system to simulate theoperation of a PLCElectrical andmechanical data@ Power supply:_ 230/400 V AC + E for the motorand the conveyor_ 24 V DC or 48 V DC depending on module@ Size (H x W x D) - weight:_ conveyor belt:1000 x 600 x 500 mm - 20 kg_ motor: 250 x 390 x 205 mm - 7 kg_ modules: 70 x 110 x 250 mm - 1 kgMain industries@ Electrical engineering@ Industrial engineering and maintenanceOther industry@ Industrial science and technologyPackage descriptionnewThe operational parts of the automation system modular offer are used toconnect a control section to a system simulating a real basic process.The different operational parts provided are:@ a 230/400 V – 180 W base-mounted asynchronous motor for connectionto a starter, variable speed drive or DOL starter@ a table-mounted conveyor belt with asynchronous motor, equipped with2 sensors, for connection to the PLC I/O@ a traffi c management module. This operational part represents a set oftraffi c lights at a crossroads and is intended for the study of industrial PLCprogramming@ an automatic barrier for simulating operation of a real system, taking accountof safety features@ a temperature controller. This operational part represents an oven in whichthe heating element is an incandescent lamp. It integrates a PT100 probe anda measurement transmitter. The lamp is controlled over a range of 0-10 V.This module is intended for process control studies@ an electric shutter controlled by two commands - raise and lower. Automaticcut-out is provided at the upper position (shutter open) and the lower position(shutter closed)@ a process control module that simulates a punching system.All these operational parts can be connected in complete safety to all themodules in the modular offer.Traffi c managementConveyor beltAutomatic barrierProcess controlTo orderMD1AMP001: motorMD1AMP002: conveyor beltMD1AMP003: traffi c managementMD1AMP004: 15 W lampMD1AMP005: automatic barrierMD1AMP006: temperature controllerMD1AMP007: electric shutterMD1AMP008: process controlEducational solutions catalogue 2010-201161