MicroLogix 1400 Programmable Controllers

More documents

Recommendations

Info

10 MicroLogix 1400 Programmable ControllersController Input and Output DescriptionCatalogNumberDescriptionInputPowerUserPowerEmbeddedDiscrete I/OEmbeddedAnalog I/OComm.Ports1766-L32BWA1766-L32AWA1766-L32BXB1766-L32BWAA1766-L32AWAA1766-L32BXBA100/240V AC24 V DC100/240V AC24V DC24V DCNone24V DCNone12 Fast 24V DC Inputs8 Normal 24V DC Inputs12 Relay Outputs20 120V AC Inputs12 Relay Outputs12 Fast 24V DC Inputs8 Normal 24V DC Inputs6 Relay Outputs3 Fast DC Outputs3 Normal DC Outputs12 Fast 24V DC Inputs8 Normal 24V DC Inputs12 Relay Outputs20 120V AC Inputs12 Relay Outputs12 Fast 24V DC Inputs8 Normal 24V DC Inputs6 Relay Outputs3 Fast DC Outputs3 Normal DC OutputsNone4 Voltage Inputs2 VoltageOutputs1 RS232/RS485 (1)1 Ethernet/IP1 RS232 (2)(1)Isolated RS-232/RS-485 combo port. Same as ML1100 Comm 0(2) Non-isolated RS-232. Standard D-sub connectorPublication 1766-IN001A-EN-P - July 2008
MicroLogix 1400 Programmable Controllers 11Hazardous Location ConsiderationsThis equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or non-hazardouslocations only. The following WARNING statement applies to use in hazardous locations.WARNINGEXPLOSION HAZARD• Substitution of components may impair suitability for Class I, Division 2.• Do not replace components or disconnect equipment unless power has been switchedoff.• Do not connect or disconnect components unless power has been switched off.• This product must be installed in an enclosure. All cables connected to the productmust remain in the enclosure or be protected by conduit or other means.• All wiring must comply with N.E.C. article 501-10(b) and/or in accordance withSection 18-1J2 of the Canadian Electrical Code, and in accordance with the authorityhaving jurisdiction.Use only the following communication cables in Class I, Division 2 hazardous locations.Environment ClassificationClass I, Division 2 Hazardous EnvironmentCommunication Cables1761-CBL-AC00 Series C or later1761-CBL-AM00 Series C or later1761-CBL-AP00 Series C or later1761-CBL-PM02 Series C or later1761-CBL-HM02 Series C or later2707-NC9 Series C or later1763-NC01 Series A or later1747-CP3 SeriesPublication 1766-IN001A-EN-P - July 2008
Page 3 and 4: Installation InstructionsMicroLogix
Page 7: MicroLogix 1400 Programmable Contro
Page 12 and 13: 12 MicroLogix 1400 Programmable Con
Page 16 and 17: ESCOK16 MicroLogix 1400 Programmabl
Page 38 and 39: INPUTSINPUTS0 1 2 3 4 5 6 7 8 9 10
Page 44 and 45: Publication 1766-IN001A-EN-P - June

MicroLogix 1400 Programmable Controllers

Create successful ePaper yourself

Delete template?

Save as template?