MicroLogix 1400 Programmable Controllers
MicroLogix 1400 Programmable Controllers
MicroLogix 1400 Programmable Controllers
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
18 <strong>MicroLogix</strong> <strong>1400</strong> <strong>Programmable</strong> <strong>Controllers</strong>2. Secure the battery connector wires so that it does not block the 1762 expansion busconnector as shown below.Battery compartment1762 I/Oexpansion busconnectorBattery wireconnectorBattery connectorBattery wirestwisted pair44522Connect 1762 I/O Expansion ModulesATTENTIONRemove power from the system before installing or removing expansion I/O or damage tothe controller may result.Connect 1762 I/O after mounting the controller.1. Remove the expansion port cover to install expansion I/O modules.2. Plug the ribbon cable connector into the bus connector.Publication 1766-IN001A-EN-P - July 2008