Appendix S - SaskPower Electrical Service Requirements

Section 2.2Technical Requirements For Service Up to and Including 5 kVFARM2232.2.4.1 Standard Service2.2.4.1.1 Single Phase Service up to 300 VFor supply services up to 200 A, options include:• SaskPower supplied Rural Metering (with or without a standby transfer switch) as per Figure 2-12, 2-13 or2-14.The Rural Metering consists of a meter socket, thermal circuit breaker and an integrated splitter compartment forConsumer service conductors not exceeding 350 kcmil.For supply services greater than 200 A, options include:• Consumer supplied 400 A, 120/240 V self-contained meter socket as per Figure 2-4 and Table 2-1.• Consumer supplied outside splitter as per Figure 2-7 and 2-8 and Table 2-1.• Consumer supplied service termination / CT enclosure as per Figure 2-4 (a) and Table 2-1.• Secondary terminals of SaskPower supplied pad-mounted transformer.2.2.4.1.2 Single Phase Service greater than 300 VFor supply services up to 200 A, options include:• Consumer supplied outside splitter, as per Figure 2-7 and 2-10 and Table 2-1.• SaskPower supplied F-Cabinet (240/480 V) as per Figure 2-15.• Secondary terminals of SaskPower supplied pad-mounted transformer.2.2.4.1.3 Polyphase Service up to 300 VFor supply services up to 200 A, options include:• Consumer supplied self-contained meter socket (limited to SaskPower supplied 4/0 cable), as per Figure 2-2and Table 2-1.• Consumer supplied outside splitter, where supply service conductors exceed 4/0 in size, as per Figure 2-7 inconjunction with Figure 2-2 and Table 2-1.• SaskPower supplied F-Cabinet, as per Figure 2-16.• secondary terminals of SaskPower supplied pad-mounted transformer.For supply services greater than 200 A, options include:• Consumer supplied outside splitter, as per Figure 2-7 and 2-8 and Table 2-1.• Consumer supplied service termination / CT enclosure as per Figure 2-4 (b) and Table 2-1.• secondary terminals of SaskPower supplied pad-mounted transformer.Electric Service Requirements November, 2004