MT600D Brochure - Challenger

hydraulics & PTOPGS 10/11do more with easeA powerful hydraulic system, a versatile PTO and a high-capacity, three-point hitch complementthe massive pulling power of the MT600D Series.High-PerformanceHydraulicsA closed-center, pressure- and flowcompensatedhydraulic system providesflow to multiple functions at up to 46gpm (175 lpm) and 2,900 psi (200 bar).A power-beyond circuit and a loadsensingline are also available, while afifth and sixth spool valve are optional.The MT600D Series tractors use fiveseparate pumps:• One for charging the TechStar CVT• Two for the steering circuit (onebeing an emergency back up)• One for low-pressure circuits likethe diff lock, PTO engagement, etc.• One large variable-displacementunit solely for the spool valvesand three-point hitch.Customize HydraulicSettingsUsing the touch keys and rotarydial on the TMC display, you canelectronically enable or disable “float”and accurately set ram extension andretraction, flow rates and kickout timing.Adaptable PTO SystemsPTO speed is digitally displayed on thedash for precise control of PTO-drivenimplements. The hydraulically actuatedsystem allows for smooth modulationand system protection.Economy PTO SystemThis allows the engine speed to bereduced by 18.5% to 1,605 rpm ineconomy mode, while maintaining full1,000 PTO shaft speed.Lots of LiftStandard amenities on all modelsinclude an electronic three-point hitchwith a maximum lift capacity of 22,760lbs (10,323 kg), four remote hydraulicoutlets and a choice of PTO systemsthat synch with your operation.Options include a front three-pointhitch and up to six rear remotes andtwo front remotes.Smooth TransportAs mounted equipment is being movedover the road or across the headlandin the raised position, the ActiveTransport Control (ATC) hydrauliccylinders automatically absorb theshocks that negatively impact ridequality and stability.