on Cabinet & Merchandiser Controllers - Master-Bilt

ELECTRONICCONTROLLER SYSTEMSFor Cabinets & MerchandisersFromElectronic controller systems, a standard feature on manyMaster-Bilt cabinets and merchandisers, take refrigerationcontrol to the next degree.Because many mechanical parts are replaced with solid statetechnology, refrigeration system reliability is greatly increased.Fewer parts also mean fewer potential problems and service calls.Downtime, when necessary, is greatly reduced.All control board functions and diagnostics are accessedthrough a simple-to-use panel display mounted on the cabinet.No need for manually adjusting mechanical timers or othercomponents. Electronic controllers also allow a higher degreeof precision over conventional methods when adjusting defrostand temperature settings.Common industry temperature and defrost presets are alreadyprogrammed into the control board. Just hook up the electricalsupply and you’re in business.

Controller Features• Controllers are standard on many models.Consult individual spec sheets or operationsmanuals to determine if equipped.• Solid state control for increased product reliability• Digitally displays temperature, time and built-indiagnostics• Regulates room temperature and defrost settings• Pre-programmed settings for common industryapplications• Time defrost• Audible and visual alarms• Three relay outputs: compressor, defrost andevaporator fan• Input voltage: 115V/208V/230V/1PH/50Hz/60HzMechanical Parts Eliminated• Room thermostat• Defrost termination and fan delay control• Defrost timer• Compressor contactor when the freezer amp drawis less than 16 amp, single phase• Digital temperature display or other temperatureindicatorParts Added (Factory-mounted)• Controller with LED readout and setup keys• Two solid state temperature sensorsPanel Interface Features **Panel interface layout may vary.Cabinet System Diagram908 Highway 15 North • New Albany, MS 38652800-647-1284 • FAX: 800-232-3966www.master-bilt.com1391-11/11-web ©2013 Master-Bilt Products, an unincorporated division of Standex International Corporation. All rights reserved. Printed in U.S.A.