Centricity PACS Version 1.0 CONFORMANCE STATEMENT for ...

More documents

Recommendations

Info

GEMS INFORMATION TECHNOLOGIESCENTRICITY PACS 1.0 CONFORMANCE STATEMENTREV 0, MAY 2002 IIS FP 10617Data Element Tag DescriptionPrinter Status (2100,0010) Printer device statusPrinter Status Info (2100,0020) Additional information about printer devicePrinter Name (2100,0030) Printer nameManufacturer (0008,0070) Manufacturer of the printerManufacturer Model Name (0008,1090) Manufacturer’s model name of the printerDevice Serial Number (0018,1000) Manufacturer’s serial number of the printerSoftware Version (0018,1020) Manufacturer’s designation of softwareversion of the printerDate of Last Calibration (0018,1200) Date when the printer was last calibrated.Time of Last Calibration (0018,1201) Date when the printer was last calibrated.TABLE 7-3: ATTRIBUTE LIST REQUESTED BY DPS AE IN N-GET OPERATIONIf the N-GET-RQ fails, the DPS AE will release the association and terminate the print job.The DPS AE accepts N-EVENT-REPORT-RQ from the well-known Printer SOP instance at any timeof the life-cycle of the print association.The DPS will release the association if the Printer Status Info attribute contains one of the followingvalues in either N-GET-RSP or N-EVENT-REPORT-RQ messages received from the called AE:x"RECEIVER FULL"x"NO RECEIVE MGZ"x"PRINTER INIT"x"SUPPLY EMPTY"x"NO SUPPLY MGZ"x"FILM JAM"In these conditions, the DPS AE assumes that the called AE is not in a normal operating state tocontinue any print job sent to it. It is also assumed that a manual intervention is required, to correct thiscondition.The DPS AE accepts an N-EVENT-REPORT-RSP including any standard event attributes andacknowledges the receipt of the message immediately by sending an N-EVENT-REPORT-RSPmessage to the well-known Printer SOP instance.7.3.2.2.2 SOP Specific Conformance for Basic Film Session SOP ClassAfter a successful check of the Printer attributes (see Section 7.3.2.2.1), the DPS AE creates a BasicFilm Session by invoking N-CREATE-RQ message. The following data attributes are provided in theN-CREATE-RQ message:Data Element Tag Value Sent by DPS AE7–58
GEMS INFORMATION TECHNOLOGIESCENTRICITY PACS 1.0 CONFORMANCE STATEMENTREV 0, MAY 2002 IIS FP 10617Number of Copies (2000,0010) Number of copies requested. The DPS AEsends value one (1) or two (2).Print Priority (2000,0020) The default value sent by the DPS AE isMEDIUM. Three values can be sent:LOWMEDIUMHIGHThese are configured by the DPS user.Medium Type (2000,0030) The default value sent by the DPS AE isCURRENT. Four values can be sentCURRENTPAPERCLEAR_FILMBLUE_FILMThese are configured by the DPS user.Film Destination (2000,0040) The default value sent by the DPS AE isCURRENT. Three values can be sentCURRENTMAGAZINEPROCESSORThese are configured by the DPS user.Film Session Label (2000,0050) DICOM_RPINTMemory Allocation (2000,0060) 0TABLE 7-4: ATTRIBUTE LIST OF N-CREATION-RQ FOR CREATION OF BASIC FILM SESSIONThe DPS AE waits for receiving an N-CREATE-RSP message from the called AE as response to theBasic Film Session creation request. According to the received N-CREATE-RSP message, the DPS AEbehaves as following:1. If the creation of the Basic Film Session fails, the DPS AE releases the association and terminatesthe print job.2. If the creation of the Basic Film Session succeeds, the DPS AE continues to create all film boxinstances for the print job. After completion of the print job, the DPS AE deletes the Basic FilmSession instance by invoking an N-DELETE-RQ message.3. Except the N-DELETE-RQ message after completion of the entire print job, the DPS AE does notsend any message to the created Basic Film Session instance. In particular, the DPS AE neverexecutes the print job at the Basic Film Session level by invoking an N-ACTION-RQ message tothe Basic Film Session instance.7.3.2.2.3 SOP Specific Conformance for Basic Film Box SOP ClassAfter successful creation of a Basic Film Session instance, the DPS AE creates one Basic Film Box tothe Basic Film Session instance. The following attributes will be provided in the N-CREATE-RQmessage:Data Element Tag Value Sent by DPS AE7–59
Page 5 and 6:
GEMS INFORMATION TECHNOLOGIESCENTRI
Page 7 and 8:
1. INTRODUCTION1.1 OVERVIEWThis DIC
Page 9 and 10:
Page 11 and 12:
Page 13: GEMS INFORMATION TECHNOLOGIESCENTRI
Page 16 and 17: GEMS INFORMATION TECHNOLOGIESCENTRI
show all

Centricity PACS Version 1.0 CONFORMANCE STATEMENT for ...

Create successful ePaper yourself

Delete template?

Save as template?