Emergency Lighting

Arrangement of ComponentsB 1 mA 3,25 mA 3,25 mB 1 mEvolution single lamps and Evolution continuous rows are impactproofaccording to DIN 18032 part 3 and DIN VDE 0710 Part 13 and bearthe according check approval. The installation will be ball-proof, if theoriginal components are used for suspended installation of Evolution.The load rating of the customer side installation and fastening partsalways has to be at least 150 kg, which complies to the requiredquintuple safety according to DIN VDE 0711 and DIN VDE 0100 part 559.In Germany, BGV C1 (formerly VBG 70) is to be considered when usingEvolution in multi purpose halls or on stages. If persons are movingbelow suspended loads, supporting bodies may only be loaded with onetenth of the calculated ultimate load, fastening means with only onetwelfth of the calculated ultimate load. In this case, the fastening pointmust be able to sustain at least 360 kg (twelvefold safety) instead of atleast 150 kg (fivefold safety).Alternatively, more hanging eye bolts have to be installed. Accordingto sketch, the fastening measure A should not exceed 3,25 m; the nonsupportedoverhang B should not exceed 1 m.The Evolution carrier section can be integrated to form continuous rowsof luminaires. Depending on their height, the required illuminationand evenness of lighting, the position of the lighting units is determinedindividually; all the necessary elements of the Evolution modularassembly system are converted material related. The system-integratedlock spring mechanism grants the continuous rows of luminaires to beimpact-proof.Sports Hall Lighting167