H.264 Series 2-Megapixel Network Camera PL621 / PL621E - Pixord

More documents

Recommendations

Info

3. Network ConfigurationIP Installer is a utility that provides an easier, more efficient way to configure the IP address and networksettings of the devices. It even provides a convenient way to set the network settings for multipledevices simultaneously using the batch setting function. Moreover, IP Installer can save the networksettings for all devices as a backup and restore them when necessary.Preparation before IP Assignment1. Always consult your network administrator before assigning an IP address to your server in order toavoid using a previously assigned IP address.2. Ensure the PL621 is powered on and correctly connected to the network.3. MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label of thedevice as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).*0004290000B14. Although the IP Installer is able to find and configure any PL621 in the LAN except those that are behinda router, it is a good idea to set the host PC to the same subnet. In order to connect to the Web-baseduser interface of the camera, the host PC must be in the same subnet. For more information aboutsubnets, please consult your network administrator.Using IP Installer to Assign an IP Address to PL6211. Once IP Installer has been successfully installed on the PC, double click the IP Installer icon on thedesktop, or select it from Start > Programs > IP Installer > IP Installer > Launch IP Installer.2. Click the menu bar Tool > Search Network Device to search the device in the LAN.7
3. From the list, select the device with the MAC Address that corresponds to the device that is to beconfigured. The MAC Address is identical to the unit’s S/N (Serial Number).4. Double click the item to open the Property Page for the selected device or click the menu bar View >Property.5. After filling in the properties, click [Set] button to complete the configuration settings in the remotedevice while saving configuration in the PC. If click [Close] button, the configuration is only be saved inthe PC.8
Page 1: H.264 Series 2-MegapixelNetwork Cam
Page 4 and 5: LiabilityPiXORD Corporation reserve
Page 6 and 7: Installation1. Hardware Connection1
Page 10 and 11: Open the Web-based UI of the Select
Page 12 and 13: 1. Live ViewVideo formatBit rateIP
Page 14 and 15: Configuration Pages ListVideo‣ Ge
Page 16 and 17: AdvancedStream 1 Setting:‣ RTSP P
Page 18 and 19: Camera General Setting:‣ Brightne
Page 20 and 21: 4. EventEvent ServerClick on the [A
Page 22 and 23: Motion Detection1To add a motion de
Page 24 and 25: Configured detection window will be
Page 26 and 27: 234562. Give a name to this event.3
Page 28 and 29: StorageDisplay the storage informat
Page 30: AdvancedEnable or configure other n
Page 33 and 34: DDNSDynamic DNS configuration; the
Page 35 and 36: UserLogin users for Web access and
Page 37 and 38: Server MaintenanceThis page provide
Page 40 and 41: Use Custom Settings: The modificati

H.264 Series 2-Megapixel Network Camera PL621 / PL621E - Pixord

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?