You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2 Hardware Installation<br />
30<br />
Power-on Select<br />
JP8<br />
�<br />
1-2 On:<br />
Power-on via<br />
AC power<br />
2-3 On:<br />
Power-on via<br />
power button<br />
(default)<br />
JP8 is used to select the method of powering on the system. If you<br />
want the system to power-on whenever AC power comes in, set<br />
JP8 pins 1 and 2 to On. If you want to use the power button, set<br />
pins 2 and 3 to On.<br />
Important:<br />
If you want the system to automatically power-on when power<br />
returns after an AC power failure, you must:<br />
1. Set JP8 pins 1 and 2 to On.<br />
2. The PWRON After PWR-Fail field must be set to "On".<br />
(Integrated Peripherals submenu, Super I/O Device section<br />
of the BIOS).<br />
1<br />
2<br />
3<br />
1<br />
2<br />
3