TV-Free TF-E65 for BMW E65 Professional navigation systems with ...

More documents

Recommendations

Info

2. InstallationSwitch off ignition and disconnect the vehicle’s battery! If according to factory rulesdisconnecting the battery has to be avoided, it is usually sufficient to put the vehicle issleep-mode. In case the sleep-mode does not show success, disconnect the battery with aresistor lead.The video-in-motion interface is connected tothe backside of the OEM screen.Remove 3 TORX screws at the OEM screen.Remove cover grill (only plugged). Place softtowel beneath the navigation monitorto avoid scratchesFlip down the board monitor.NOTE: The OEMscreen gets stuck with its connector at the upperside of the cockpit. Insert a hard plastic sheet likea credit card to prevent cockpit fromtaking damage.Page3Version 29.01.2013TF-E65
Remove the black connector at the backside ofthe screen as shown below.Remove 12-pin insert from black vehicleharness connector.Insert 12-pin insert into black connectorof the harness TV-BMW65.Insert the completed black connector intoharness TV-BMW65.Page4Version 29.01.2013TF-E65
Page 1 and 2: TV-FreeVideo-in-motion InterfaceTF-
Page 6 and 7: Connect 12-pin insert from TV-BMW65

TV-Free TF-E65 for BMW E65 Professional navigation systems with ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?