99500-39222-01E - GSX1400 Club

www.GSX1400FE.comENGINE 3-7• Remove the clutch push rod 1.• Remove the speed sensor rotor 2.• Remove the engine sprocket nut 3 and the washer.• Remove the cotter pin. (For E-03, 28, 33)• Loosen the rear axle nut and the rear torque link nut.• Loosen the left and right chain adjusters.• Push the rear wheel forward and make sure that the drive chainhas enough slack.• Disengage the drive chain from the rear sprocket.• Remove the engine sprocket.ENGINE MOUNTING• Support the engine using an engine jack.• With each engine mounting bolts and nuts removed,detach theframe down tube .• Draw out the engine mounting shafts and remove the engineassembly from frame.