Dometic AES Service Manual (2134KB) - Bryant RV Services

(13)Just above the burner assembly, located in thegenerator section of the cooling unit, are the12 volt DC and 120 volt AC heating elementsthat provide the heat to the cooling unit onthose modes.(14)By removing the two screws on the left side ofthe base assembly and one screw in the burnerarea, rotate the clamping plate clockwise toremove it.(15)The mounting plate assembly can then bemoved backward to gain access to the remainingparts in the control system.(16)From this view we can see the Printed CircuitBoard which controls the automatic heatselection functions of the refrigerator and the12 volt DC relay which energizes the 12 voltDC heating element when the automaticselection calls for 12 volt operation. To theright of the DC relay is the igniter reignitermodule.A-6-5